Simply divide the BTUs by 12,000 to calculate the tonnage of your unit. For example, if your air conditioner is 36,000 BTUs, you have a 3 ton unit. Some manufacturers bury tonnage or BTU information in their model numbers. Look for an even, two-digit number between 18 and 60.
The easiest way to look Trane tonnage model number is on the AC unit itself. Go to the condensing unit on the outside and look for the data plate stamped on the actual side of the compressor. Find the model number. Within this string of letters and numerals, you should find an even, two-digit number.
Thereof, How do I read my air conditioner model number?
Look at the model number (Located on the data plate stamped on the actual side of the compressor) on the compressor and there should be a number divisible by 12. It should start at 18 and not be more than 60 for residential AC units. 18 to equal 1.5 tons and 60 to equal 5 tons of cooling.
Also to know is, How do I read my Bryant model number? Remove the front door and look inside the unit. You should see the model number printed on rating-plate or decal.
Subsequently, question is, How do you read a Trane furnace model number? – First letter: The model number starts with 4. …
– Second letter. …
– The next 3 letter represents the product type. …
– The fifth number is for unit’s Seasonal Energy Efficiency Ratio. …
– The six letter. …
– The seven and eight number indicate tonnage. …
– The nine letter represents the age. …
– Number ten indicates the power supply voltage.
Also, How do I find my carrier model number?
How do you turn on a Trane thermostat?
How do you read carrier models and serial numbers?
The most common way to to determine the carrier ac age is through the serial number. In the above style, the determining factor is having a letter in the middle of the serial number. The first two digits are the week of manufacturer. The second set of digits are the year of manufacture.
How can I tell the tonnage of my Trane?
The capacity in tons of a Trane outdoor unit can be determined by dividing the 7th and 8th digit of the model number by 12. So if the model number is 4TTX4036A1000AA, take 36 and divide by 12, equaling 3 tons.
How do you read a Bryant serial number?
The serial number is formatted by 4 numbers, a letter, then 5 numbers. The first two numbers are the week of manufacture and the following two numbers are the year of manufacture. The date of manufacture can usually be found on these units.
Where is the model number on a Trane?
Furnace model numbers are found on a sticker inside the front cover of a Trane furnace. The sticker is usually found to one side of the furnace inducer.
Where do I find the model number on my air conditioner?
The model number of your air conditioner is listed on a metal plate on the side of the unit near the electrical lines running to your home.
How do I read my furnace model number?
You can find the model and serial numbers (M/N and S/N) for your furnace by removing the top-front service panel and looking to the left side of the interior cabinet or the top of the blower deck, depending on whether your system is an 80% or 90% AFUE unit.
Where is the carrier model number?
Remove the front door and look inside the unit. You should see the model number printed on rating-plate or decal.
How do you read a Heil serial number?
To determine the date of manufacture of an Heil unit, use the first four numbers of the serial number. The first two numbers represent the year, and the third and fourth numbers represent the week of manufacture. In the sample number provided the unit was manufactured the 41st week of 2000.
How do you get a Trane thermostat off hold?
To cancel the temporary setting, you need to press ‘Cancel’, then press ‘Hold’ in order to permanently adjust the temperature. This will override the temperature settings for all time periods. The ‘Hold’ feature turns off the program schedule and allows you to adjust the thermostat manually, as needed.
How do you read carrier model numbers?
The most common way to to determine the carrier ac age is through the serial number. In the above style, the determining factor is having a letter in the middle of the serial number. The first two digits are the week of manufacturer. The second set of digits are the year of manufacture.
Where is the model number on a Bryant furnace?
Where is the model number on a Bryant furnace? Gas or Oil Furnaces: Remove the front door and look at the upper-left side of the unit. You can find the model number listed on a “rating plate” sticker inside of the unit.
Don’t forget to share this post 
References and Further Readings :