Call the GM assistance hotline at 800-537-5140. Follow the prompts and select the brand of your vehicle. Enter the six-digit dealer code and then enter the six-digit radio serial code. The automated system will provide you with a four-digit code to unlock your radio.
Table of Contents
READ ALSO
You must start your car and turn on the ignition to unlock the chevy impala engine. press and hold the two and three preset numbers until a three-digit code shows up on the radio monitor. you will write this code forthwith.
Thereof, How do you reset theft lock on a GM radio?
Step 1: Start the vehicle and turn on the radio. The radio will display “LOC” indicating the Theftlock system is activated. Step 2: Press and hold preset buttons 1 and 4 for ten seconds. (If you don’t have a fourth preset button, press and hold presets 2 and 3.)
Also to know is, How do you unlock a GM Radio 2010? Turn on the ignition; it must be completely on and your vehicle running. Press the power button on your radio for several seconds to unlock the system. If this doesn’t work, pull your vehicle’s codes by pressing and holding presets 2 and 3 for 10 seconds. Write down the 3-digit code that displays on the screen.
Subsequently, question is, How do you take theft lock off radio? – Turn the key to the “OFF” position. Hold the “Mute” button and turn the key to the “ACC” position. Let go of the “Mute” button and quickly hold down the “1” button.
– Turn the key back to the “OFF” position. The radio should remain on. Press the “Scan” button to cycle through the preset messages.
Also, How do I unlock my Chevy Impala radio?
Turn your ignition on and press the radio power button. Your radio will display “LOC.” Step 2: Enter the first two digits of the radio unlock code. Press the hour button on the radio to enter the first two numbers of your radio unlock code.
How do I unlock my GM radio?
Dial 1-800-537-5140 to connect with GM’s toll-free radio hotline. Once you’re connected, you’ll be asked to provide your vehicle’s radio identification number, along with a special dealer access code. You’ll then be rewarded with a 4-digit retrieval code, which will allow you to unlock your radio.
How do I reset my GM radio?
– Turn on your car. …
– Press and hold down both the second and third preset buttons. …
– Write down the two- or three-digit code that appears in the LED display.
– Press the AM/FM button on the radio.
– Write down the next two- or three-digit code that appears in the LED display.
How do you unlock a Delco radio?
Call the GM assistance hotline at 800-537-5140. Follow the prompts and select the brand of your vehicle. Enter the six-digit dealer code and then enter the six-digit radio serial code. The automated system will provide you with a four-digit code to unlock your radio.
How do you unlock a Delco Theftlock radio?
– Press and hold presets 2 and 3 for about 5 to 10 seconds until you. …
– After doing step one and writing down the code, immediately press. …
– Call this number, it’s a prerecorded message, so don’t worry about. …
– Follow the normal procedure in your owners manual for unlocking the.
How do you unlock a car radio that is locked?
– Call your car manufacturer directly. Your car manufacturer’s phone number is in your owner’s manual. Ask to be connected to the support department. …
– Enter the code and unlock your stereo. Use the code you received from the manufacturer to unlock and and activate your car stereo.
How do I turn off Theftlock on my GM radio?
– Write down the user or factory back-up code.
– Turn the ignition to ACCESSORY or RUN.
– Turn the radio OFF.
– Press the 1 and 4 buttons together. …
– Press the Minute button and “000” will appear on the display.
How do I unlock my 2013 Chevy radio?
Turn on the ignition; it must be completely on and your vehicle running. Press the power button on your radio for several seconds to unlock the system. If this doesn’t work, pull your vehicle’s codes by pressing and holding presets 2 and 3 for 10 seconds.
What does it mean when your radio says locked?
Put your key in the ignition and turn on your radio. The digital display will read “LOC” if the radio is locked. … GM Theftlock radios are designed to lock up automatically when the vehicle’s battery dies or becomes disconnected, though an electronic malfunction could also cause the Theftlock function to activate.
How do I reset my radio in my Chevy Impala?
– Turn the car ignition to the “ON” position.
– Turn the radio off, if it is on.
– Press and hold the “Minute” button on the radio faceplate.
– Release the “Minute” button once “000” appears on the radio display.
– Press the “Minute” button again until the last two digits of the security code for your radio is displayed.
How do I get my car out of anti theft mode?
Turn the key to unlock your car door, but don’t release it. Hold the key in this position for 20 to 30 seconds. This lets the system know you have the correct key, and it can allow you to bypass the alarm system. Some vehicles recognize the key simply by turning the key back and forth in the door lock key cylinder.
How do I unlock my 2012 Chevy radio?
Dial 1-800-537-5140 to connect with GM’s toll-free radio hotline. Once you’re connected, you’ll be asked to provide your vehicle’s radio identification number, along with a special dealer access code. You’ll then be rewarded with a 4-digit retrieval code, which will allow you to unlock your radio.
What triggers theft deterrent system?
The theft-deterrent system in your vehicle may be triggered by the following: Key learning (copy of key made) Forced entry alarm (door, trunk, hood) … Charging alarm (electric vehicles only)
Don’t forget to share this post 💖
References and Further Readings :
