– Measure up. Measure the width of your chimney breast. …
– Start in the middle of the chimney breast. Cut a length to go above the shelf. …
– Score and trim the excess. Use your chalked line to position the paper in the centre, brushing down and out. …
– Paper the sides of the chimney breast. …
– Remove any excess paper from the sides.
– Make a diagonal cut in the waste overlapping the fireplace.
– Cut towards the corner of the mantelshelf.
– Tuck the wallpaper in all round and crease for trimming to the surround.
– Trim the wallpaper.
Thereof, How do you hang wallpaper on a fireplace?
Also to know is, How do you uneven corners on wallpaper? – As you reach the last strip before a corner, measure and cut the strip lengthwise so that it wraps the corner about 1⁄2 inch.
– Hang the strip but peel it back from the corner a few inches.
Subsequently, question is, What side should you start wallpapering? Ideally begin at the corner and hang your first length of paper on a wall with no doors or windows. That way, you can hang a full length from the ceiling to the top of the skirting-board. Choose a wall to the right of the window if you’re right-handed or to the left if you’re left-handed.
Also, How do you wallpaper over a fireplace?
Use wallpaper panels. Keep the wallpaper confined to panels around the fireplace and the rest of the room. You can do this by papering sections of the wall and then separating them from one another with wooden moldings. This often will be a custom design, which allows you to frame your fireplace however you want.
Do you start wallpapering from the middle?
Does the wallpaper pattern create a special need? With a large pattern, cutting the paper vertically at a corner of a room may cause a noticeable break in the pattern. To overcome that problem, start working from the center of the wall or from another spot.
Where do you start when wallpapering a chimney breast?
There are two main methods of doing this; by starting at the centre of a section of wallpaper, or using the centre of your chimney breast and placing the first and second section on either side of it. The first method requires you to have a section cut out that will be used as the centre of the chimney breast.
How do you wallpaper into a corner?
1 Measure the last length again, adding a small overlap (about 1 – 2 cm) in width, and cut it. 2 Now hang the paper just like you did with the previous lengths. 3 Press it into the corner with a wide wallpapering spatula (alternatively, use a long ruler). 4 Press the overlap onto the next wall.
Can you put wallpaper around a fireplace?
Use wallpaper panels. Keep the wallpaper confined to panels around the fireplace and the rest of the room. You can do this by papering sections of the wall and then separating them from one another with wooden moldings. This often will be a custom design, which allows you to frame your fireplace however you want.
Should you wallpaper around corners?
Wallpapering inside corners Never wrap wallpaper more than 1⁄2 inch around an inside corner with a drop. Even if the walls are perfectly plumb, the paper will pull away from the corner as it dries, making it vulnerable to tearing or wrinkling. Instead, make a wrap-and-overlap seam.
Do you wallpaper from left to right?
Ideally begin at the corner and hang your first length of paper on a wall with no doors or windows. … Choose a wall to the right of the window if you’re right-handed or to the left if you’re left-handed. Also, it’s best to work away from the window, so the paper edges don’t cast a shadow if they overlap slightly.
Where do you start wallpapering on a chimney breast?
– Measure up. Measure the width of your chimney breast. …
– Start in the middle of the chimney breast. Cut a length to go above the shelf. …
– Score and trim the excess. Use your chalked line to position the paper in the centre, brushing down and out. …
– Paper the sides of the chimney breast. …
– Remove any excess paper from the sides.
Where do you start when wallpapering a room?
Wallpapering Tips Where To Start Choose your joining corner according to whether it is the most inconspicuous in the room. For example, in a room that is square, the corner that is behind where the door opens is a good option, and where there is a chimney breast the internal corner next to it is ideal.
How do you modernize a stone fireplace?
– Paint the stone or brick fireplace. This is a quick and easy budget-friendly option that can be done in an afternoon. …
– Install a new mantel. …
– Install a gas insert. …
– Retile the surround or the hearth. …
– Reface or resurface the fireplace.
Should an alcove be painted lighter or darker?
Furthermore, should an alcove be painted lighter or darker? The reason is since light colors bring forward, you’d want the alcove to be lighter so it’ll look not as deep, and dark colors recede so it’ll make the chimney look farther back.
How much does it cost to redo a fireplace?
The cost to remodel a fireplace ranges from $390 to just over $2,000, if done by a professional. A small fireplace remodel might involve repairing or enhancing a fireplace façade, while a larger project would include installing a wood stove or replacing the chimney.
How do you hang wallpaper for beginners?
Don’t forget to share this post 💖
References and Further Readings :
