Number of Lights To calculate the current draw for each fixture, divide its wattage by 110 volts. For example, a 100-watt fixture would draw 100 divided by 110, or approximately 0.9 ampere. For 100-watt fixtures, you can have a maximum of 12 divided by 0.9A, or 13 fixtures.
Breaker Limitations Each CFL or LED bulb typically gives the same amount of light as a 60-watt incandescent bulb while drawing 10 watts or less, which is equivalent to a current draw of 1/12 amp. Thus a 15-amp circuit can safely control 180 or more fixtures that use CFL or LED bulbs.
Thereof, Does 15 or 20 amp have more outlets?
Because 15-amp receptacles can be used with 20-amp circuits, most of the outlets you see in American homes are the standard 15-amp variety, with two slots and a U-shaped grounding hole. … A 20-amp circuit, protected by a 20-amp breaker or fuse, must be served by 12-gauge or 10-gauge wire.
Also to know is, How many lights can be on a 15 amp circuit? 30 lights
Subsequently, question is, Can you put lights and outlets on the same circuit? Basic answer to your question of can a mixture of lights and receptacles be installed on a single circuit is yes. … Also be sure to install a GFCI receptacle, not a conventional duplex receptacle.
Also, How many 60 watt bulbs can be on a circuit?
Each fixture witha 60-watt incandescent or halogen bulb draws about 1/2 amp, so a15-amp breaker for a standard lighting circuit would be ableto handle 30 of them.
Can lights and outlets be on the same circuit?
Basic answer to your question of can a mixture of lights and receptacles be installed on a single circuit is yes. Check with local authorities on those limitations but yes it can be done. … Also be sure to install a GFCI receptacle, not a conventional duplex receptacle.
How many LED lights can I put on a 20 amp circuit?
40 lights
Can you mix lights and outlets on the same circuit?
Basic answer to your question of can a mixture of lights and receptacles be installed on a single circuit is yes. Check with local authorities on those limitations but yes it can be done. … Also be sure to install a GFCI receptacle, not a conventional duplex receptacle.
How many LED lights can be on a 15 amp circuit?
180
Is it OK to have a 15 amp outlet on a 20 amp circuit?
You are allowed to use a 15 amp rated outlet on a 20 amp circuit simply because it is expected that the cord that’s plugged into the outlet should not exceed 15 amps (by code). The current conducted through the front of the outlet is added to the 20 amp branch total at the wire, not within the outlet itself.
How many outlets and lights can be on one circuit?
One rule of thumb is to assign a maximum draw of 1.5 amps to each receptacle, which allows for 10 receptacles on a 20-amp circuit.
Can I pull power from an outlet for a light switch?
You can pull power from a switch box—sometimes Switch boxes can sometimes be used as a power source for a new outlet, but only if the box is large enough and has neutral and ground wires running through it.
Can the outlets in a bathroom be on the same circuit as the lights?
Bathroom Circuits In other areas, it’s permissible to install the lighting, receptacles, and a standard vent fan on a single 20-amp circuit provided the circuit serves only the bathroom and no other rooms.
How many amps does a 4 foot LED light draw?
The Feit 4′ LED shop lights draw about 0.3amps each according to the manufacturer.
Where should outlets go in a bathroom?
Outlets must be on at least one dedicated circuit that doesn’t include the lights, so that high-watt appliances won’t trip the entire bathroom electrical system and leave you in the dark. Outlets cannot be located above or closer than 36 inches to the bathtub.
How many LED lights can go on a 15 amp circuit?
180
Can I run a light from a socket?
You can run lights from anywhere you like, however it may not be considered good practice by some. You should be aware that extending circuits to a shed has a number of problems concerning safety in the shed, or outside, and you should seek professional advice.
Don’t forget to share this post 
References and Further Readings :
