It is important to keep the discharge point of your sump pump as far from your foundation as possible. The minimum distance should be 10 feet. Most discharge pipes have a flexible hose tightly attached to the pipe coming from the basement. During non-freezing weather this works just fine.
Thereof, How far should sump pump discharge?
10 feet
Also to know is, How deep should a sump pump discharge line be in Michigan? 24 inches
Subsequently, question is, How do you fix a sump pump discharge pipe?
Also, How do you keep a sump pump discharge from freezing?
– Ensure that the sump pump discharge line outside the home is either buried in the yard, or extended out above-grade at a downward slope.
– Bury the pipe at least five inches below the frost line (the maximum depth of ground below which the soil doesn’t freeze) to protect it from freezing.
How do you winterize a sump pump discharge?
– Remove your sump pump’s discharge hose for the winter. …
– Make sure to re-attach the hose when warmer temperatures return. …
– Have an extra discharge hose handy. …
– Never unplug your sump pump. …
– Clear out debris in your sump pump’s pit. …
– Test your pump regularly.
How far should sump pump discharge from house?
10 feet
How do you keep drain tiles from freezing?
– Do Not Tie Your Roof Downspouts Into The French Drain For Your Foundation. …
– Consider a Dry Well At The End Of Your Drain. …
– Create A Flare In Your System If It Runs To The Surface. …
– Insulate Any Piping Above the Frost Line. …
– Add A Bit More Slope To Your Piping.
How far can a sump pump discharge?
For most average-sized homes in areas with average water tables, a 1/3 HP sump pump should be sufficient. Typically, 1/3 HP pumps can handle 7′ – 10′ vertical lifts from the sump pit if they have one 90-degree elbow and a horizontal pipe run between 3 feet and 25 feet.
Where does a sump pump drain to?
Sump pumps send water away from a house to any place where it is no longer problematic, such as a municipal storm drain or a dry well. Pumps may discharge to the sanitary sewer in older installations.
Can you bury sump pump discharge pipe?
It is recommended to bury the pipe at least 5 inches below the frost line––and if you opt for an above grade solution, extend the discharge line at least 10 feet away from the foundation wall. The sump pit has a line that goes from the pump up and out of the basement. … Don’t use automotive anti-freeze in the sump pump.
Where do you put the discharge on a sump pump?
– They generally install at about an 8 foot head- this means that the discharge line runs straight upwards about eight feet before being level with the yard. …
– A sump pump discharge line needs to be large enough to hold ALL the water that the sump pump discharges.
How far can a 1/2 HP sump pump push water?
1/2 HP Submersible Sump Pumps When you have a slightly higher vertical lift (10-15 feet) or a long horizontal run (example: 30-150 feet), you may notice a loss of water flow due to the increased friction from the longer runs.
How deep should you bury a sump pump line?
Dig a trench for the sump pump drain line that is at least 2 feet wide and the depth of the frost line in your area, plus an additional 2 feet. For example, if the frost line in your area is 12 inches, dig the trench 3 feet deep.
How do you keep sump pump discharge from freezing?
– Ensure that the sump pump discharge line outside the home is either buried in the yard, or extended out above-grade at a downward slope.
– Bury the pipe at least five inches below the frost line (the maximum depth of ground below which the soil doesn’t freeze) to protect it from freezing.
How do I know if my sump pump has discharge?
The first way to test the sump pump is to trace the two electrical cords of the sump pump. The pump cord plugs into the back of the float cord plug. Both cables should be unplugged, and only the pump cord should be plugged into the outlet. If you hear a humming sound when turning on the pump, the pump works.
How high should sump pump be?
For most average-sized homes in areas with average water tables, a 1/3 HP sump pump should be sufficient. Typically, 1/3 HP pumps can handle 7′ – 10′ vertical lifts from the sump pit if they have one 90-degree elbow and a horizontal pipe run between 3 feet and 25 feet.
Don’t forget to share this post 
References and Further Readings :
