between 29 to 36 inches
The standard kitchen sink is 8 inches deep, which means that the normal distance between a kitchen sink drain and the floor is 28 inches. This will vary, depending on the height of the counter and the depth of the sink bowl. In the bathroom, the sink drain is typically between 24 inches above the floor.
Thereof, How do you rough in a kitchen sink drain?
Drill 2 1/4-inch holes in the studs and floor plate, as needed, to route a 2-inch drainpipe. Keep in mind that the drain must maintain a minimum down slope of 1/4 inch per foot toward the sewer. Run a 2-inch drainpipe from the tie-in point at the larger waste line or sewer to the point you marked behind the sink.
Also to know is, What does rough in plumbing mean? Rough-in is the stage of a construction project when the various mechanical, electrical, and plumbing lines are brought in. This is when lines are laid out, but final connections are not made until other stages of the project are completed. …
Subsequently, question is, How do you rough plumb a house?
Also, What’s the standard height of a sink?
Standard bathroom sink heights range from 29 inches to as much as 36 inches high, depending upon personal preference and the type of sink. For example, pedestal sinks are built between 29 and 33 inches high, while bathroom vanity cabinets with set-in sinks range from 30 to 36 inches in height.
What is the standard kitchen sink drain size?
3 1/2 inches
How high should my bathroom sink drain be off the floor?
18”- 20”
How high off the floor should a vanity drain be?
22 to 24 inches
How far should sink drain be from wall?
between 18 and 20 inches
How long does plumbing rough in take?
5 days
What does rough in mean for toilet installation?
Learn | Toilets | What is a Toilet Rough-In. A toilet’s rough-in refers to the measurement dimension from the finished wall to the center of mounting holes on the floor flange. Toilets are typically offered in either 10 inch, 12 inch, or 14 inch rough-ins. The 12 inch rough-in is by far the most common in the US.
What is the standard height of wash basin?
Standard bathroom sink heights range from 29 inches to as much as 36 inches high, depending upon personal preference and the type of sink. For example, pedestal sinks are built between 29 and 33 inches high, while bathroom vanity cabinets with set-in sinks range from 30 to 36 inches in height.
How high should a bathroom sink be from the floor?
34 inches
Do I need plumbers putty for kitchen sink drain?
Increasingly, I’m finding that plumber’s putty is not recommended for sink drains, especially if it has its own rubber gasket. In places where the manufacturer does not supply a gasket (and the flange is not metal) they suggest silicone caulk. Be sure to read the directions for your drain assembly!
How high off the floor should a bathroom sink drain be?
between 24 inches
How much does it cost to rough plumb a house?
Rough in Plumbing Costs for a New Construction Rough in costs range anywhere from $7,000 to $15,000 for an average size home of roughly 2,300 square feet with two or three bathrooms. It is $600 to $1,600 per fixture with final costs ranging from $1,500 to $20,000.
How high off the floor should a floating vanity be?
If the piece measures 20 inches high and you want a height of 31 inches, you must mount it 11 inches above the floor. If you want the look of a floating sink with the entire vanity raised 12 inches or higher above the floor, you want a vanity of a smaller height.
Don’t forget to share this post 
References and Further Readings :
