min. 3 hours
The Henry Feather Finish is the same stuff as is in this Ardex bag. They are made by the exact same company -just different packaging. … DO KNOW THIS – I found the Henry product – the powder before mixing – to be of a much darker gray that the Ardex.
Thereof, How do you use a Henry feather finish?
Also to know is, How do you coat a countertop with concrete?
Subsequently, question is, What does feather finish mean? ARDEX FEATHER FINISH is a cement based smoothing compound designed to provide a smooth, permanent finish to a variety of internal substrates prior to the installation of floorcoverings such as vinyl, carpet and ceramic tile. … ARDEX FEATHER FINISH mixes with water to provide a smooth, creamy mortar for easy application.
Also, Is ardex feather finish flexible?
The base ingredient is cement, Ardex feather finish is pretty flexible thin, maybe their p-82? 2 part Primer mixed in with Ardex is what they use for embossing leveler. So the deflection should be removed in the subfloor with blocking underneath.
Can you paint over ardex feather finish?
hookknife Hard Surface Installer Charter Member Senior Member. Reading the directions for this product, it states it can be applied over any Ardex product, such as Feather Finish. With that being said, Feather Finish is also allowed to be installed over wet scraped cutback residue.
How many coats of sealer do I need for concrete countertops?
two
How do you mix ardex feather finish?
Put clean water in the mixing container first, and then add the ARDEX FEATHER FINISH®. For best results, mix with an ARDEX T-2 Ring Mixing Paddle and 2” heavy-duty drill. To mix smaller quantities by hand, use 2 parts by volume of powder to 1 part of water. Use a margin trowel and mix vigorously for 2 to 3 minutes.
What is feather finish used for?
ARDEX FEATHER FINISH® is an underlayment formulated from a blend of Portland cement and other hydraulic cements that provides a smooth, permanent finish for a variety of substrates prior to the installation of today’s demanding floor coverings, including sheet vinyl and VCT (vinyl composition tile).
How long do you have to wait to seal concrete countertops?
A. If you are using the SiAcryl 14, you can begin sealing 4-5 days after pouring. If you are using an epoxy sealer you must make sure the concrete is 100% cured. This can take as long as 28 days, however, on a slab this thick you will usually be safe after 10 days.
What is the best concrete countertop sealer?
Acrylics are a commonly used sealer. They come in solvent-based or water-based formulations (solvent-based products are often preferred). These sealers dry water-clear and are UV-resistant. Acrylic sealers can be brushed, sprayed or rolled on to the concrete.
When Should I seal my concrete countertops?
Because concrete is naturally porous, concrete countertops should always be sealed to protect them from food stains, scratches and water absorption. The right sealer will not only protect the countertop surface, but also enhance its color and sheen.
How do you feather a floor?
How do you finish a concrete countertop?
If you want to achieve an ultra-smooth, seamless surface, then polishing or sanding the concrete after it’s cast is the best approach. Polishing can also be used to expose decorative aggregate, glass, or stone within the concrete, resulting in terrazzo-like finishes.
What is ardex feather finish used for?
ARDEX FEATHER FINISH® can be used to smooth ridges, fill cracks, gouges, and joints for skim coating to a true featheredge over all types of interior concrete, masonry, wood, terrazzo, and ceramic and quarry tile.
Can you sand ardex feather finish?
The final coat when dry should be sanded as smooth as possible before putting on color or sealant. I would allow 1 day between coats. Ardex Feather Finish dries really fast, but better to give it 24 hours to be sure. … The final coat when dry should be sanded as smooth as possible before putting on color or sealant.
Is Henry feather finish the same as ardex?
The Henry Feather Finish is the same stuff as is in this Ardex bag. They are made by the exact same company -just different packaging. … DO KNOW THIS – I found the Henry product – the powder before mixing – to be of a much darker gray that the Ardex.
Don’t forget to share this post 💖
References and Further Readings :
