If your 1.5 ton AC is rated for a power of 2kw, it draws a current of 8.4 amperes during the time of normal operation, but at the time of starting it it draws a more current than it’srated current so it will be better to have 12 amp, circuit breaker, but 12 amp.
Most common voltage ratings for AC units are 115, 125 and 220 volts, and amperage rating can run from 15 to 20 amps. The lower two voltage ratings are common in smaller units, while units with a rating higher than 15,000 BTUs will require a 220-volt circuit.
Thereof, How many amps does a 1.5 ton AC consume?
Hence, cooling capacity of 1.5 ton = 5275 W of power. If the supply voltage is around 220 V AC, then the running current will be 1510/220 = 6.9 A. As starting current is usually 2–2.5 times the running current, the starting current of a 1.5 ton 5 star split AC with no gas is estimated to be around 15–20 A.
Also to know is, How many amps does a 3 ton air conditioner use?
Subsequently, question is, What size breaker do I need for AC? Breaker or Fuse (amps) Min. copper wire size (AWG)
———————- —————————
20 12
30 10
40 8
55 6
Also, How many amps does a 4 ton air conditioner use?
How many amps does a 4 ton AC draw?
What is the quantity of gas in a 1.5 ton AC?
Meaning a 1.5 tone AC may require 60psi of R22 but the same system would require 40psi of R407c. R22, R410a, R407c, etc may not have the same pressure.
How much power does an AC unit draw?
The power consumption of air conditioners averages 318 watts (hourly, for a 24,000 BTU unit) in most American households. The power draw of a unit that size ranges from 1,800 to 2,500 watts in most cases.
How many amps does an AC use?
Most common voltage ratings for AC units are 115, 125 and 220 volts, and amperage rating can run from 15 to 20 amps. The lower two voltage ratings are common in smaller units, while units with a rating higher than 15,000 BTUs will require a 220-volt circuit.
How many sq ft will a 4 ton AC cool?
ZONE 1 ZONE 5
——– ————– ————–
2.5 Tons 1201 – 1500 sf 1401 – 1650 sf
3 Tons 1501 – 1800 sf 1651 – 2100 sf
3.5 Tons 1801 – 2100 sf 2101 – 2300 sf
4 Tons 2101 – 2400 sf 2301 – 2700 sf
How many solar panels do I need to run a 1.5 ton air conditioner?
you will need minimum 2 kw solar panels and 3 kw solar inverter.
How many amps does a 18000 BTU air conditioner use?
8 amps
How many tons of AC do I need per square foot?
0.0016 tons
What is the current rating of 1.5 ton AC?
Hence, cooling capacity of 1.5 ton = 5275 W of power. If the supply voltage is around 220 V AC, then the running current will be 1510/220 = 6.9 A. As starting current is usually 2–2.5 times the running current, the starting current of a 1.5 ton 5 star split AC with no gas is estimated to be around 15–20 A.
How many amps does a 1.5 ton air conditioner use?
If your 1.5 ton AC is rated for a power of 2kw, it draws a current of 8.4 amperes during the time of normal operation, but at the time of starting it it draws a more current than it’srated current so it will be better to have 12 amp, circuit breaker, but 12 amp.
What size breaker do I need for an AC unit?
It’s going to completely depend on the unit that’s being installed, but commonly it’ll be 30-60 amp with 10-4 AWG wire. You’re probably looking at a 3.5 ton unit, so you’ll be in the 30-40A (10-8 AWG) range. It might be worth it to get a few quotes from local HVAC companies, and see what they want to install.
How many tons of AC do I need per cubic foot?
The Rule of Thumb But the general rule of thumb is to have 1 cfm per square foot of living space. So a 1600 square foot home would have 1600 CFM of cooling capacity, or a 4 ton unit. Said another way, each ton of air conditioning will keep cool 400 square feet of living space.
Don’t forget to share this post 
References and Further Readings :
