15 amps
Your cooler is rated at 4500 cfm, that would be a 1/2 horse motor. The same standard has applied for years with coolers. A 3,000 cfm cooler uses 1/3 HP, a 4,500 uses 1/3-1/2 and a 6500 cfm model uses 1/2 or 3/4 HP. If your total of new sqft is 1600, 4,500 cfm might get you by but it’s cutting it close.
Thereof, What size motor do I need for my swamp cooler?
Your cooler is rated at 4500 cfm, that would be a 1/2 horse motor. The same standard has applied for years with coolers. A 3,000 cfm cooler uses 1/3 HP, a 4,500 uses 1/3-1/2 and a 6500 cfm model uses 1/2 or 3/4 HP. If your total of new sqft is 1600, 4,500 cfm might get you by but it’s cutting it close.
Also to know is, How do I maximize my swamp cooler? – Open the Window. …
– Make Sure the Tank is Full and Pads are Wet. …
– Allow Cooler to Run Before Turning on Blower. …
– Clean the Cooler Regularly.
Subsequently, question is, Can I run my swamp cooler all day? If you can make it to your thermostat when your alarm goes off (the first time), you can create a cool environment that can last throughout the day. Running the swamp cooler at time of day when it’s already cool outside guarantees that you’ll get colder air than when the sun is up and out.
Also, How much does it cost to replace a swamp cooler?
The average cost to install a swamp cooler is $2,446 and ranges from $1,404 and $3,492. Labor will run about $70 an hour. Materials, or the unit itself, will cost anywhere from $40 to $2,300. A larger house will have more air to cool and will therefore require a larger unit.
How long should I run the pump on my swamp cooler?
How long should I run the pump on my swamp cooler? You also want to only run the pump for as long as you have water in the reservoir. Running the pump without water will overheat the pump, causing it to burn out.
How much does it cost to run a swamp cooler all day?
Swamp coolers will cost about $2 to run for 24 hours. To run a unit 24 hours a day, every day, for an entire month, it would cost roughly $60. In comparison, a central AC costs about $330 per month at this rate.
What can you put in a swamp cooler to make it smell better?
Pour two or three drops of tea tree oil or grapefruit seed extract into the water in the swamp cooler. These substances will help neutralize offending odors and prohibit the formation of mold and mildew that can form within the unit. Tea tree oil is very effective but produces a strong aroma that may offend some.
Does putting ice in a swamp cooler help?
In actual practice, adding ice to your swamp cooler only has a limited effect. … It’s the combination of temperature and humidity in the ambient air that determines how much of a boost ice provides, not the ice itself. In fact, adding ice to your evaporative cooler might actually hamper the cooling process.
How much does a swamp cooler motor cost?
Swamp Cooler Motor Replacement A motor replacement costs anywhere from $50 to $600. Larger, more specialized, systems require more expensive motors.
Is it OK to run a swamp cooler all day?
During the hottest part of the day, it is not ideal to run your swamp cooler. You will only be able to lower the temperature to a certain extent. But, if it is exceptionally hot outside, running the swamp cooler will be absolutely essential for comfort. Evening hours are a great time to run the swamp cooler.
How long does it take a swamp cooler to work?
15 minutes
Can you put bleach in a swamp cooler?
Regular disinfection of evaporative coolers – 3 to 6 Months Completely drain the evaporative cooler and refill with a mixture of fresh water and household bleach (that has 4% available chlorine). … Do not exceed this concentration or the evaporative cooler could be damaged.
When should I replace my swamp cooler?
Ultimately, your swamp cooler will last a long time if you take proper care of it. It’s important to have your unit as fall approaches and started back up just in time for summer. Wagner can help you with this, so your unit is good to go all year long.
How do you prevent calcium build up in a swamp cooler?
– Use Quality Pads. The quality of cooler pads you use on your evaporative cooling unit determines your coolant’s ability to prevent deposit accumulation. …
– Clean the Cooler Regularly. …
– Add a Bleed-Off Valve. …
– Shut the Evaporative Cooler.
How much does it cost to install an evaporative cooler?
An evaporative or swamp cooler will cost an average of $2,000 to install. This total includes an average of $700 in labor, or 10 hours at $70 per hour. This also includes the unit price and other materials such as tools, fittings, fasteners, and mounting hardware.
Can I run my swamp cooler without the pump on?
A swamp cooler will still operate without water flowing to it, but this means it will run without lubrication, in turn causing irreversible damage to the pump from the friction.
Don’t forget to share this post 💖
References and Further Readings :
