The RLA is the max Run Load Amps your compressor can take before if fails and causes a breakdown. According to the AC manufacturers the ideal amp draw for your AC system is 30-40 percent of your units RLA.
23.23 amps
Thereof, How many amps does a 5 hp motor draw at 480 volts?
HP 200 Volts 440-480 Volts
— ——— ————-
3 11 4.8
5 17.5 7.6
7.5 25.3 11
10 32.2 14
Also to know is, How many amps does a 110 air compressor draw? 15 amps
Subsequently, question is, How many amps does 110 volts have? 15 amp
Also, How many amps does a 4 ton AC draw?
How many amps does a 5hp motor draw?
is12.4 amps
How many amps are in a ton?
Ton (refrigeration) Volt Ampere [V*A]
———————— ——————-
0.01 ton (refrigeration) 35.1685284207 V*A
0.1 ton (refrigeration) 351.6852842067 V*A
1 ton (refrigeration) 3516.8528420667 V*A
2 ton (refrigeration) 7033.7056841333 V*A
How many amps are in a 120 volts?
Power Current Voltage
——— ———- ——–
90 Watts 7.5 Amps 12 Volts
100 Watts 8.333 Amps 12 Volts
110 Watts 9.167 Amps 12 Volts
120 Watts 10 Amps 12 Volts
How many amps does a 5 hp motor use?
HP
—————————————————————————————————————————–
5
7-1/2
10
The voltages listed are rated motor voltages. The listed currents are for system voltage ranges of 110 to 120 and 220 to 240.
What size breaker do I need for a 5 hp motor?
60 amp
How do I convert amps to tons?
To convert tons to amps, you must first convert tons to BTUs per hour, after which you can convert this value to watts, then use the formula amps = watts / volts to solve for amps.
How many amps is a 3.5 ton air conditioner?
You’re probably looking at a 3.5 ton unit, so you’ll be in the 30-40A (10-8 AWG) range.
How many amps does a 110?
110 Volt 20 Amp You can plug in a smaller device that does not need 20 amps because it still offers the 2 vertical inputs. If your appliance strictly needs 20 amps to power it, the horizontal pin will prevent you from plugging it into an incompatible 15 Amp socket.
How many amps is a 120 volt outlet?
15 amps
How many amps is a 3 ton AC?
How much electricity does a 5 ton AC use?
An average 5-ton air conditioner (with 10 EER rating) will run on 6,000 W.
How do I know if I have 100 amp or 200 amp?
At the top end of the two rows of branch circuit breakers, there will be a central circuit breaker that controls the power to the entire panel. This is the main circuit breaker, and its amperage rating will be something like 60, 100, 150, or 200 amps.
Don’t forget to share this post 
References and Further Readings :
