For concrete, the formula for volume is as follows: length x width x thickness. To determine how many bags of concrete you will need, divide the total cubic yards needed by the yield. Use the following yields per each bag size: 40 pound bag yields .011 cubic yards.
On average, concrete steps cost around $2,000. Most projects range between $900 and $5,000. Where your price falls depends on the number of steps and the size of the staircase you need. Pouring cement is about $300 per step at 2 feet wide and 11 inches deep, including materials and labor.
Thereof, How many bags of concrete do you need for a yard?
On average it will take 90 40lb bags, 60 60lb bags, or 45 80lb bags to fill one cubic yard of concrete.
Also to know is, How do you figure concrete steps? – Divide the Steps into Rectangles. The first step to estimate the volume of a set of steps is to divide the steps into smaller rectangles. …
– Find the Volume of Each Rectangle Section. …
– Find the Total Step Volume.
Subsequently, question is, How many 50lbs bags of concrete make a yard? Now totaling those two together will be 3,945 TOTAL cubic inches. I then divided that number by 1728 and came up with 2.2829 cubic feet. Now taking 2.2829 cubic feet & dividing by 27= . 08455 parts of one yard.
Also, How many bags of quikrete do I need for a 10×10 slab?
For a 10 x 10 slab, you would need 77 60-pound bags or 60 80-pound bags.
How much does it cost to repair steps?
Stair Repair Cost The cost to repair stairs is $4.50 to $8 per square foot for all material, an expert’s time, and fittings. Replacing the handrail costs an additional $30 to $45 per linear foot. The total average project cost to repair stairs and railings is $667 or between $308 and $1,051.
How many 60 pound bags of concrete make a yard?
60 pound bag yields . 017 cubic yards. 80pound bag yields .
How much area does a 80lb bag of quikrete cover?
Quikrete’s Concrete Mix yield’s about . 15 cubic feet for every 20 pounds of mix, so a 40-pound bag yields .
How do you layout concrete steps?
– Lay Out Footings. Lay out footings 3 inches wider than the steps. …
– Outline Steps. …
– Check Square, Level, and Plumb. …
– Install Riser Forms. …
– Attach Braces. …
– Fill with Rubble. …
– Add Rebar. …
– Mix and Fill with Concrete.
How much does a 12×12 concrete slab cost?
How much does a 12×12 concrete slab cost? The average cost to pour a 12×12 concrete slab that is 4” thick is between $888 and $1,584, with professional labor and materials included.
How much area does a 80lb bag of cement cover?
4 sq feet in that amount of cement.
How many 80 pound bags of concrete does it take to make a yard?
How many 80 lb bags of concrete do I need for 1 yard? The finished volume of an 80# bag of Sacrete or Quikrete (pre-mixed cement, sand and gravel) is 0.6 cubic foot (stated on the bag). There are 27 cubic feet in a cubic yard.
How many square feet does a 90 lb bag of cement cover?
Each 90 lb bag of QUIKRETE® Concrete Mix yields approximately 0.675 cu ft. For a walk of 3′ by 25′ at 4” thick, you will need 25 cubic feet of concrete, or 37 90-pound bags.
How much does it cost to replace concrete steps?
On average, concrete steps cost around $2,000. Most projects range between $900 and $5,000. Where your price falls depends on the number of steps and the size of the staircase you need. Pouring cement is about $300 per step at 2 feet wide and 11 inches deep, including materials and labor.
How much would a 40×60 concrete slab cost?
How much does a 40×60 concrete slab cost? It would be about $8,500 to $12,000 for a 40×60 foot concrete slab, 6 inches thick. That’s based on national averages of around $5 per square foot for a fully engineered, finished concrete slab, including labor and materials.
How much does it cost to put in concrete steps?
On average, concrete steps cost around $2,000. Most projects range between $900 and $5,000. Where your price falls depends on the number of steps and the size of the staircase you need. Pouring cement is about $300 per step at 2 feet wide and 11 inches deep, including materials and labor.
How much does a 40×60 pole barn cost?
The cost to build a 40×60 pole barn house is $35,000 to $70,000 or $15 to $30 per square foot. The larger and more complex pole barn designs cost $45 per square foot, or $100,000 plus when fully finished out.
Don’t forget to share this post 💖
References and Further Readings :