MM CM Approximate Fractional Inches
—– —— —————————–
15 mm 1.5 cm Just short of 5/8 Inch
16 mm 1.6 cm 5/8 Inch
17 mm 1.7 cm Just short of 11/16 Inch
18 mm 1.8 cm Just short of 3/4 Inch
Thereof, Is 5mm the same as 1/4 inch?
5mm = just over 3/16 inch. 6mm = almost 1/4 inch.
Also to know is, How many mm means 1 inch? 25.4 mm
Subsequently, question is, Whats bigger 1/4 or 5mm? MM Approximate Size In Inches Exact Size In Inches
— ————————– ——————–
4mm 1/8 Inch 0.15748 Inches
5mm 3/16 Inch 0.19685 Inches
6mm Just short of 1/4 Inch 0.23622 Inches
Also, What size is 3/4 in MM?
Dimensions — Inches to Metric
—————————– ——
0.750” 3/4”
0.813” 13/16”
0.875” 7/8”
0.938” 15/16”
What is 5 mm thickness?
Actually, 5 mm=5mm/25.4mm/inch=0.1968 inches (rounding up). These are not 5mm thick. Also, the mm does not apply to length and width. By caliper the thickness is a little over 6 mm, or very close to 1/4″ (1/4″ = 6.096mm).
What size is 10 mm in inches?
MM Approximate Size In Inches Exact Size In Inches
—- ————————– ——————–
8mm 5/16 Inch 0.31496 Inches
9mm Just short of 3/8 Inch 0.35433 Inches
10mm Little over 3/8 Inch 0.39370 Inches
11mm 7/16 Inch 0.43307 Inches
What is the standard equivalent to 5mm?
SAE Metric Inch
—– —— —–
5mm 0.197
5.5mm 0.216
7/32″ 0.219
6mm 0.236
How many MM is a inch chart?
Millimeters (mm) Inches (“) (decimal) Inches (“) (fraction)
—————- ——————– ———————
10 mm 0.3937 ″ 25/64 ″
20 mm 0.7874 ″ 25/32 ″
30 mm 1.1811 ″ 1 3/16 ″
40 mm 1.5784 ″ 1 37/64 ″
What MM is .020 thickness?
Conventional Gauge Inches Metric
—————— ———— ————
24 .020 -.026″ 0.5 – 0.6 mm
22 .027 – .032″ 0.7 – 0.8 mm
20 .033 – .037″ 0.8 – 0.9 mm
19 .038 – .042″ 0.9 – 1.1 mm
What is a mil thickness?
A mil is a thousandth of an inch — . 001 inch. It is a typical manufacturing dimension. When we make a product we specify the thickness as a mil.
What size is 3/8 inch in MM?
Dimensions — Inches to Metric
—————————– —–
0.375” 3/8”
0.438” 7/16”
0.500” 1/2”
0.563” 9/16”
How many mm is an inch exactly?
25.4 mm
Is mm the same as mil?
A mil is a measurement that equals one-thousandth of an inch, or 0.001 inch. One mil also equals 0.0254 mm (millimeter). Thus a mil is not the same thickness as a millimeter. The term “mil” is not an abbreviation but a unit of measure.
What size is 3/4 inch in MM?
Dimensions — Inches to Metric
—————————– ——
0.750” 3/4”
0.813” 13/16”
0.875” 7/8”
0.938” 15/16”
What is the metric equivalent of 1/4 inch?
Dimensions — Inches to Metric
—————————– —–
0.250” 1/4”
0.313” 5/16”
0.375” 3/8”
0.438” 7/16”
What size is a 3 mm?
3mm = almost 1/8 inch. 4mm = 5/32 inch (= a bit over 1/8 inch) 5mm = just over 3/16 inch. 6mm = almost 1/4 inch.
Don’t forget to share this post 
References and Further Readings :
