Bolt Diameter Metric Standard
————- —— ——–
3/8″ 14mm 9/16″
7/16″ 16mm 5/8″
1/2″ 19mm 3/4″
9/16″ 21mm 13/16″
Bolt Diameter Standard Metric
————- ——– ——
3/8″ 9/16″ 14mm
7/16″ 5/8″ 16mm
1/2″ 3/4″ 19mm
9/16″ 13/16″ 21mm
Thereof, Which is bigger 9 16 or 14mm?
Bolt Diameter Standard Metric
————- ——– ——
7/16″ 5/8″ 16mm
1/2″ 3/4″ 19mm
9/16″ 13/16″ 21mm
Also to know is, What is the same size as 14mm? SAE Metric Inch
—— —— —–
13mm 0.512
17/32″ 0.531
14mm 0.551
9/16″ 0.563
Subsequently, question is, What is 14mm in fraction? Decimal Fraction Metric
——- ——– ——–
0.0313 1/32 13 mm
0.0394 14 mm
0.0625 1/16 14.29 mm
0.0787 15 mm
Also, What size socket is between 14mm and 15mm?
1/4″ Drive 3/8″ Drive 1″ Drive
———- ———- ——–
12mm 15mm 65mm
13mm 16mm 67mm
14mm 17mm 70mm
15mm 18mm 71mm
What is 14mm in standard?
13mm. Little over 1/2 Inch. 0.51181 Inches. 14mm. 9/16 Inch.
What are the socket sizes in order?
Six Point Standard Sockets (5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16) Six Point Metric Sockets (8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21) Six Point Metric Deep Sockets (8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19)
Is 13mm the same as 9 16?
13mm = just over 1/2 inch. 14mm = almost 9/16 inch. 15mm = almost 19/32 inch. … 23mm = 29/32 inch.
What is 16mm in SAE?
SAE Metric Inch
—— —— —–
5/8″ 0.625
16mm 0.63
21/32″ 0.656
17mm 0.669
What size is equal to 14mm?
MM Approximate Size In Inches Exact Size In Inches
—- ————————– ——————–
14mm 9/16 Inch 0.55118 Inches
15mm Just short of 5/8 Inch 0.59055 Inches
16mm 5/8 Inch 0.62992 Inches
17mm Just short of 11/16 Inch 0.66929 Inches
What are the standard socket sizes smallest to largest?
1/4″ Drive 3/8″ Drive 1/2″ Drive
———- ———- ———-
4mm 5.5mm 8mm
4.5mm 6mm 9mm
5mm 7mm 10mm
5.5mm 8mm 11mm
What size socket is equal to 15mm?
SAE Metric Inch
—— —— —–
17/32″ 0.531
14mm 0.551
9/16″ 0.563
15mm 0.591
Is 24mm and 15 16 the same?
Not only is 15/16″ basically the same as 24mm, but 1 1/16″ is the same as 27mm.
What is SAE size?
What is SAE? … SAE, which stands for the Society of Automotive Engineers, was used as the standard primarily on U.S.-made cars and trucks through the 1970s. SAE sockets are sized in inches and fractions of inches.
Do you need both metric and SAE wrenches?
As a combination wrench has a specific size that is not adjustable, trying to use the wrong wrench on a nut will go poorly. With wrenches, you also have to deal with both SAE (Society of Automotive Engineers — AKA inches) and metric sizes.
What are the wrench sizes in order?
Standard American wrench sizes, from the largest to smallest and measured in inches, are 5/8, 19/32, 9/16, 1/2, 7/16, 3/8, 11/32, 5/16, 9/32, 1/4, 7/32, 3/16, 5/32 and 1/8. Wrenches are available in a set or individually. A small set has six to 10 wrenches, ranging from 5/16 to 1 inch in size.
What is a 15 mm wrench in standard?
Bolt Diameter Wrench Size (Standard) Wrench Size (Metric)
————- ———————- ——————–
3/8″ 9/16″ 15mm
7/16″ 5/8″ 16mm
1/2″ 3/4″ 19mm
9/16″ 13/16″ 21mm
Don’t forget to share this post 
References and Further Readings :
