This gives you room for adjustment when you come to decide on the distance between the pleats. The amount of fabric for the pleats themselves should be between 6″ and 8″ (15 and 20cms). To begin with, allow 4 pleats per width of fabric, assuming standard fabric width of 54″ (137cms).
We recommend using 7 drapery rings to hang each 50″W rod pocket panel, and 13 rings to hang each 100″W rod pocket panel. Our sheer rod pocket drapery can be used with clip rings (A).
Thereof, How many pleats are in a drapery panel?
For example; a drapery made with two and a half times fullness based on the rod width will generally have an average of 5 pleats per width for single width panels, 7 pleats per width for one and a half width panels, 10 pleats for two width panels and so on.
Also to know is, Where should curtain rings be placed? In one hand, you should have both ends of the panel as well as a folded end. At one ring clip to each of the ends and the in middle of the fold. Next, place four ring clips directly in the middle of the panel, one each piece of edge of the panel.
Subsequently, question is, How do you measure for curtain rings? Simply divide the size in inches of your panel when it is fully extended and divide by how far apart you choose to have the rings. Example, if your panel measures 54 inches and you choose to place the rings 2 inches apart, you will need 27 clip on rings per drapery panel.
Also, How many pleats should curtains have?
The amount of fabric for the pleats themselves should be between 6″ and 8″ (15 and 20cms). To begin with, allow 4 pleats per width of fabric, assuming standard fabric width of 54″ (137cms).
Do you need 2 curtain panels?
If you want the curtains to be able to close fully, you should always use enough panels to cover the width of the window. Round up to the next whole number if you want to achieve more fullness.
How do you make drapery panels?
– Measure Curtain and Lining Panels. Use a tape measure to determine length from floor to desired height of curtain rod. …
– Fold and Press Hem. Place fabric on ironing board wrong-side-up. …
– Insert Weights and Sew Hem. …
– Hem Lining. …
– Create Header. …
– Sew Sides. …
– Sew Header. …
– Pleat and Hang Panels.
How do you space a drapery hook?
I like to space ring clips approximately four inches apart so that there is a handsome fold between each clip in the drapery panel. Start by clipping each end of the panel. Next, clip the middle. Finally, space the clips evenly apart as close to 4 inches as possible.
How do you measure for box pleat curtains?
How do you use drapery hooks on regular curtains?
How do you put curtain rings on?
It’s actually quite simple. You just hang them from a metal pin that’s in the back of the drapery. Some drapery rings also have built-in clips, allowing you to hang the drapes without needing to insert pins into the fabric.
How do you put clips on curtains?
How do you keep curtain panels in place?
Insert a wood screw into the back of a wooden rod to prevent gathered stationary panels from sliding. Install it toward the center of the rod, at the inside edge of the drapes when they are in the desired open position. Use a 1 1/2-inch screw and leave it extended out from the rod at least 1 inch.
Can you use curtain hooks on rod pocket curtains?
The rod pocket is internal so the curtain panel is essentially a simple panel rectangle. This makes the conversion process simpler and easier. Determine the header style you want for your drapery look and in a few minutes, you can transform your curtain panels into drapes that use drapery hooks.
How do you make drapery panels with pleats?
– Measuring. …
– Cutting the fabric. …
– Hem the bottoms. …
– Sew the sides. …
– Insert the weights. …
– Finish the top edge. …
– Attach the pleating tape. …
– Time to pleat!
How do you read curtain measurements?
Curtain measurements are always written with the width first and then the length. For example, a panel that is 46″ x 54″ is 46 inches wide and 54 inches long. Don’t buy your curtains just so they’re big enough to cover a window.
Can you have one curtain panel?
For smaller windows where a double curtain will just be too much, a single curtain panel is a much more elegant choice. They can be hung with the tie on the right, or the left, of the window.
Don’t forget to share this post 
References and Further Readings :
