Air Handler Size Home Size System Installed
—————- ———— —————-
3 ton 1601-1900 sf $1,250 to $2,165
3.5 ton 1901-2200 sf $1,380 to $2,290
4 ton 2201-2600 sf $1,590 to $2,420
5 ton 2601-3200 sf $1,800 to $2,680
– First letter: The model number starts with 4. …
– Second letter. …
– The third letter represents the product type. …
– The fourth letter equals the product family.
– The fifth number is for unit’s Seasonal Energy Efficiency Ratio. …
– The six letter. …
– The seven and eight number indicate tonnage.
Thereof, How much does it cost to replace AC and air handler?
An air handler costs $500 to $3,500, with most homeowners paying $700 to $1,500. This does not include installation, which averages $1,500 and ranges $200 to $2,100. Air handlers connect to an air conditioner or heat pump to provide cooled or heated air for an indoor space.
Also to know is, How do you read HVAC model numbers? Find the model number. Within this string of letters and numerals, you should find an even, two-digit number. The possibilities on residential units range from 18 to 60. Divide the number by 12 (which represents 12,000 Btu/hr, or one ton of cooling capacity) to get your AC unit’s tonnage.
Subsequently, question is, How much does it cost to replace an entire HVAC system? The cost to replace an HVAC system averages $7,000, with a typical range of $5,000 to $10,000. This translates into $25 to $60 per square foot, depending on the brand and size. For a … new installation, you can expect to pay $1,500 to $12,500.
Also, How do you tell the tonnage of a model number?
Some manufacturers bury tonnage or BTU information in their model numbers. Look for an even, two-digit number between 18 and 60. Or, you might see a three-digit number starting with 0.
How do I change the filter on my Trane air conditioner?
How do I find out the tonnage of my air handler?
Simply divide the BTUs by 12,000 to calculate the tonnage of your unit. For example, if your air conditioner is 36,000 BTUs, you have a 3 ton unit. Some manufacturers bury tonnage or BTU information in their model numbers. Look for an even, two-digit number between 18 and 60.
How do I tell how old my HVAC is?
Check the nameplate of the AC It’s the manufacture date. Sometimes written as MFG date. If you can find that date, you know how old the air conditioner is. If you don’t see a manufacturer date, you can still find out the age of the system.
How do you read a Trane serial number?
If the trane serial number is a 9-digit combination of letters and numbers that starts with a number, then the first number is the year. Trane heating and air conditioning company again made changes in year 2010. The first two digits of trane serial number lookup age are the year.
How long does an AC air handler last?
around 15 years
Where is the filter on a Trane air conditioner?
The filter usually fits in a slot on the air return side of the unit. These systems are usually found in smaller basements or crawl spaces where space is limited. The filter typically slides into a slot above or below the HVAC unit.
How do I read carrier model numbers?
The most common way to to determine the carrier ac age is through the serial number. In the above style, the determining factor is having a letter in the middle of the serial number. The first two digits are the week of manufacturer. The second set of digits are the year of manufacture.
How do you change the air filter on a Trane air conditioner?
– Locate your air handler filter. It may be behind the bottom panel of your indoor unit, or there may be two filters.
– Remove old filter. Make sure you insert the clean filter with the arrows on it pointing in the direction of the airflow.
– Replace with new filter.
When should an HVAC system be replaced?
10 to 15 years
Can I replace just the air handler?
Replacing just the air handler might appear cheaper right now, but over time, it will cost more in repairs, time, and high utility bills because it is inefficient.
What MERV rating does Trane recommend?
MERV-13
How do I decode a Trane model number?
– First letter: The model number starts with 4. …
– Second letter. …
– The third letter represents the product type. …
– The fourth letter equals the product family.
– The fifth number is for unit’s Seasonal Energy Efficiency Ratio. …
– The six letter. …
– The seven and eight number indicate tonnage.
Don’t forget to share this post 
References and Further Readings :
