To give you a rough estimate, you can replaster a small 12×24 inground pool for about $10,000 and up. This price can double for larger pools, but the final cost will also depend on where you live and the contractor that you hire.
In the event that a repair does become necessary, due to damage in shipping or a structural crack, there are several ways that you can ensure that your contractor matches your pool color correctly. … all of our employees are well trained in applying and resurfacing gelcoat on both fiberglass and gunite pools.
Thereof, How much does it cost to resurface a fiberglass pool?
Type Cost for a 1,00 square foot pool
———- ——————————–
Fiberglass $6,500
Vinyl $1,000 – $3,500
Also to know is, How long will a fiberglass pool last? 25 years
Subsequently, question is, How do you gel coat a fiberglass pool? – Tape off areas in the fiberglass pool that will not receive gel coat with 2-inch painter’s tape. …
– Check the gel-coat surface of the pool for cracks. …
– Sand the entire gel coat surface with 150-grit sandpaper. …
– Wipe the sanded area down with acetone.
Also, How often do pools need to be resurfaced?
A concrete pool lasts 10–15 years before it needs to be resurfaced. In addition to redoing the interior finish, you’ll usually need to replace the waterline tile at the same time.
Can a fiberglass pool be refinished?
So, how do you resurface a fiberglass pool? Typically, you would use a product like ecoFINISH if you need to have your fiberglass pool resurfaced. ecoFINISH is a long-lasting, chemical-resistant coating that can be applied to a variety of concrete and fiberglass pool surfaces.
How much does it cost to resurface a pool with fiberglass?
Average Cost to Resurface a Pool Gunite and fiberglass can average up to $6,500, including labor. Depending on what you currently have, resurfacing may require completely replacing the pool surface and base. This costs between $35,000 and $65,000 and is essentially the same as the cost of building a new pool.
Can you’re gelcoat a fiberglass pool?
How do you redo the gelcoat on your fiberglass pool? The short answer: you don’t. Gelcoat is applied in a controlled manufacturing plant for several key reasons: It takes a long time to dry and cure.
How much does it cost to resurface a pool?
When it comes to resurfacing a pool, the three primary types of finishing material and their subsequent costs are: Quartz finish – $5 per square foot. White plaster – $4 p/sf. Pebble finish – $10 p/sf.
What is the downside of fiberglass pools?
Fiberglass pools are resistant to algae Not only is algae unsightly, but it also increases the need for chemicals and lengthens the time that you need to run your pump and filter.
How do you fix a fiberglass pool that is bulge?
How do you know when your pool needs to be resurfaced?
– Plaster Flaking or Peeling. Maybe you’ve noticed the plaster is peeling along the steps or floor of your pool or spa. …
– Surface Stains. …
– Roughness. …
– Check Cracks. …
– Plaster Discolorations. …
– Structural Cracks. …
– Rust Stains. …
– Loss of Pebbles.
How do you refinish a fiberglass pool?
How long do Fiberglass pools last?
25 years
How do I resurface my pool myself?
– Step 1: Drain The Pool. One of the best times to resurface a swimming pool is in the off-season, ideally right before it needs to be filled up for the summer. …
– Step 2: Clean The Pool. …
– Step 3: Prepare The Surface. …
– Step 4: Prime The Surface. …
– Step 5: Finish The Surface. …
– Step 6: Dry & Refill.
How much does it cost to resurface a pool in California?
Pool Resurfacing Cost The average cost to resurface a pool with plaster ranges from $5 to $7 per square foot. For a 120-foot square, homeowners can expect to pay between $175 and $200 for materials like plaster and fittings. Labor costs range from $400 to $565 for six hours of labor.
How much does it cost to repair a fiberglass pool?
Fiberglass pool repair costs $300 to $400 for a gel coat that restores dinged, scratched and cracked surfaces. Expect to pay up to $800 more to repaint after doing the repairs. You also have to cover the cost of draining the water, refilling the pool and applying the right chemicals.
Don’t forget to share this post 
References and Further Readings :