Joist Size Min Capacity lbs
———- —————-
2×6 400
2×8 500
2×10 600
2×12 700
Usually, the hanger size is the same as the joist size, but you can use a hanger that is one dimensional size less than the joist depth—a 2×6 hanger can be used with a 2×8 joist, for instance. Keep in mind that the load capacity of the smaller hanger needs to be adequate to support the load on the joist.
Thereof, How much weight can a 2×8 joist hanger hold?
Joist Size Min Capacity lbs
———- —————-
2×6 400
2×8 500
2×10 600
2×12 700
Also to know is, How much weight can a 2×4 joist hanger hold? Because you want a deck that can hold at least 55 pounds-per square foot, you multiply seven by 55, showing you that you’ll need a joist hanger that can support 385 pounds.
Subsequently, question is, Can I use screws with joist hangers? You can use screws explicitly made for joist hangers. However, avoid using any other types of screws as they cannot support joist loads and are not designed to withstand shear force. While screws made specifically for joist hanger support are an option, there are other types of attachments used.
Also, How do you use a 2×4 joist hanger?
How much weight will a joist hanger hold?
Because you want a deck that can hold at least 55 pounds-per square inch, you multiply seven by 55, showing you that you’ll need a joist hanger that can support 385 pounds.
How much weight can a 2×6 joist hold?
50 pounds per square foot
Do joist hangers add strength?
If the joist hangers your carpenter used are approved for use with the newer ACQ treated lumber, you should have nothing to worry about. These metal framing connectors have been around for years and they are code approved. … They don’t have the inherent strength to support the weight of a deck or any framing member.
Can you use screws on joist hangers?
You can use screws explicitly made for joist hangers. However, avoid using any other types of screws as they cannot support joist loads and are not designed to withstand shear force. While screws made specifically for joist hanger support are an option, there are other types of attachments used.
How do you use a 2×6 joist hanger?
What size screws Simpson joist hangers?
If it is mounted on a double-ledger or joist, 2-1/2″ screws should be used. These 1-1/2″ screws are for mounting on a ledger or joist one board thick.
Can 2×4 be used for deck joists?
Considering that you will use 2x4s for the joists, at a 12″ span, you cannot make the deck larger than 8’x8′. As you will see in this project, this light construction doesn’t require complex tools or carpentry techniques, so any person with basic skills can get the job done in just a weekend.
What weight can a joist hanger hold?
Because you want a deck that can hold at least 55 pounds-per square inch, you multiply seven by 55, showing you that you’ll need a joist hanger that can support 385 pounds.
How many nails are in a 2×6 joist hanger?
Studs, 2×6: 6 nails – In the bottom of a 2×6 stud we’d use 3 (and in some cases 4) nails per side. Joist to ledger board: varies by joist depth. In a 2×6 joist I’d use 8 nails, 4 per side.
Are joist hangers strong enough?
The truth be told, that’s plenty of support assuming your deck is built correctly. If your carpenter used high-quality decking joist hangers and the correct nails, you’ve got no problems. You should be able to see several small holes on the face of the joist hanger that’s on the actual joist.
What nails do I use for joist hangers?
Outdoors use 16d double-dipped galvanized nails (or stainless steel when called for) for installing hangers. It’s true that hot-dipped galvanized box nails aren’t as thick as common nails, but they are the acknowledged choice for outdoor work. Indoors or out, for standard-type single joist hangers, use only 1-1/2 in.
How do you hang hangers with joists?
Don’t forget to share this post 
References and Further Readings :
