every 12 to 36 months
thirty years
Thereof, Is Exposed aggregate cheaper than concrete?
Stamping is not expensive, but using aggregate concrete is more economical, especially if you have a larger project. Typically, stamped concrete starts at $120 while an exposed aggregate finish is around $100.
Also to know is, Does Exposed aggregate need to be sealed? It helps hold the aggregate pebbles in place, reduces pitting and extends the life of exposed aggregate concrete. Depending on weather and traffic, when using an acrylic sealer exposed aggregate concrete should be sealed every 12 to 36 months.
Subsequently, question is, How long does it take for exposed aggregate sealer to dry? Most concrete sealers dry fairly quickly and usually dry to touch within 1-3 hours. This is true of both penetrating and topical sealers. Penetrating sealers usually fully dry for traffic in less than 24 hours with topical sealers generally taking up to 48 hours to fully dry for traffic.
Also, Is Exposed aggregate worth it?
Trusted durability For any item to be considered cost-effective, it has to last for a long time. It should be worth every penny you have spent. The durability of exposed aggregate is hard to match. It can last several years even without maintenance.
How much more expensive is exposed aggregate concrete?
$60 to $85 per square metre for plain concrete. $65 to $90 per square metre for a reinforced concrete pathway. $75 to $90 per square metre for coloured concrete. $100 to $150 per square metre for an exposed aggregate finish.
Is Exposed aggregate concrete durable?
The durability of exposed aggregate is hard to match. It can last several years even without maintenance. Other types of concrete, along with other materials, can be difficult to maintain. You need to regularly reseal them or perhaps call a professional to ensure they will still function for the years to come.
How do you remove exposed aggregate sealer?
– Pour a small amount of Xylene on an area that is still coated by the previous concrete sealer.
– Allow the Xylene to sit for 20 seconds. …
– Touch the area and if it is tacky or sticky the surface was sealed with a solvent-based sealer.
– If the concrete is not tacky or sticky the concrete was sealed with a water based sealer.
How often should I seal my exposed aggregate driveway?
every 12 to 36 months
How much does Exposed aggregate concrete cost?
Item Unit Cost
———————- ———
Material Cost $2.91
+ Labor Cost (base) $36
+ Labor Cost (upgrade) $36
Total Cost $6.29
Can you fix exposed aggregate concrete?
The cement in a concrete slab usually holds the surface layer of aggregate in an exposed aggregate slab securely in place. … To restore the appearance of the slab, you must patch these damaged areas. An epoxy mix, combined with new aggregate, can provide the patch you need.
How do you seal exposed aggregate?
When it comes to sealing exposed aggregate, there are two types of concrete sealers that are most commonly used: penetrating and topical. Penetrating sealers preserve the concrete without changing the look, allowing the exposed aggregate to retain its natural appearance and color.
How long does it take for paver sealer to dry?
Sealers can take anywhere from 4-12 hours to dry before you can walk over it, but they will continue to harden for up to 48 hours after the application. Concrete sealed with an acrylic sealer should not be walked on (except for a recoat), driven on, or wet for at least 36-48 hours.
How long does it take sealer to dry?
A: Most sealers dry fairly quickly and are usually touch-dry after 4 hours. This is true of both penetrating and topical sealers. Penetrating sealers usually fully cure in 24 hours with topical sealers generally taking up to 48 hours to fully dry.
How much does exposed aggregate driveway cost?
Install an Exposed Aggregate Driveway national average cost The national average materials cost to install an exposed aggregate driveway is $2.04 per square foot, with a range between $1.90 to $2.18. The total price for labor and materials per square foot is $9.04, coming in between $8.22 to $9.86.
Can you resurface exposed aggregate concrete?
Decorative aggregate exposed in concrete offers an attractive surface. … Over time, pieces of aggregate can dislodge if the concrete becomes brittle or water damaged, leaving unsightly ruts behind. Resurfacing an aggregate driveway is simple and prevents the damage from spreading.
How long does it take for sealer to dry?
A: Most sealers dry fairly quickly and are usually touch-dry after 4 hours. This is true of both penetrating and topical sealers. Penetrating sealers usually fully cure in 24 hours with topical sealers generally taking up to 48 hours to fully dry.
Don’t forget to share this post 💖
References and Further Readings :