You should always use it before you put your power washer away, in the fall. And when you bring your washer out in the spring, use it before you start it up for the first time. And, if your temperatures have been warm, but you haven’t started your unit within 30 days, you’ll want to give it a dose.
STA-BIL experts recommend attaching the hose on the Pump Protector can to the inlet on the pressure washer (where the water hose connects). Next, press the button on the can to disperse the fluid into the pressure washer, once fluid begins to exit the pump, it is now protected.
Thereof, What is pump saver for pressure washer?
The Briggs & Stratton 6151 Pressure Washer Pump Saver protects the pistons of your pressure washer and seals them from damage. … Use this unique anti-freeze and lubricant formula before extended storage and prior to startup the following season to keep your pump running on full blast.
Also to know is, How long should a pressure washer last? If you are a home owner, you will probably use a pressure washer less than 50 hours per year. In this case getting a machine rated for 500 hours will last you up to 10 years if properly maintained. However, if you are using it on the job, you will want something rated for 2,000 hours or more.
Subsequently, question is, How does pump saver work? If you want to protect your pump from dry run, rapid cycle, and low voltage, the PumpSaver is the product to get. If the pump runs out of water, the pump shuts down and automatically restarts after a delay. It also protects the pvc production pipe and casing from heat damage.
Also, Is pressure washer pump protector necessary?
Make Your Pressure Washer Pump Last Longer With a Pump Protector Product. Leaving water in the pump can result in mineral buildup and corrosion, which wear out the pump seals and pistons (a $200 repair). … That means the pump is fully lubed and protected against freeze damage.
How do you use a pump saver on a pressure washer?
How long can you run a pressure washer?
five minutes
How does a pump saver work?
When the current (amps) exceeds approximately 125% of calibrated current, or power (kW) drops below the adjustable underload trip point, the PumpSaver®Plus—after the trip delay—will turn off the pump. The PumpSaver®Plus will time through the restart delay, and then restart the pump.
How do you lubricate a pressure washer fitting?
How often should you change oil in pressure washer?
about every three months
Do you have to put oil in a pressure washer pump?
Pressure washer water pumps need relatively low oil recommended by the manufacturer, as specified in the owner’s manual. (Purchase pre-measured bottles of pump oil for water pumps without dipsticks.) Never use special oil additives or detergents, unless specified in the owner’s manual.
What kind of fluid goes in a pressure washer pump?
That’s why it is recommended to use non-detergent oil in pressure cleaner pumps. If you use detergent oil in a pump, all the contaminates it cleans off the surfaces will be flowing through the oil.
How do you take care of a pressure washer?
Clean dirty screens with water, or replace it if damaged. If your pressure washer is equipped with an inline screen in the wand extension, make sure it’s not clogged. Clean it with water, or replace if damaged. Inspect the spray gun, wand extension and spray tip.
Do you need pump saver for pressure washer?
Leaving water in the pump can result in mineral buildup and corrosion, which wear out the pump seals and pistons (a $200 repair). So it pays to flush the pump after every use—a quick job. Pick up a can of pump lube/ antifreeze solution (such as Briggs & Stratton 6151 Pressure Washer Pump Saver; $10 at home centers).
How do you winterize a pressure washer pump?
How much oil does a pressure washer pump take?
You don’t want to fill reservoir of oil completely… Only around 3/4 full. Place fill bolt back onto pump and tighten. Clean up the area and fire up your pressure washer.
What is the best pump for a pressure washer?
– Effective Pumps for Pressure Washers are Essential! …
– Homelite Vertical Pressure Washer Pump Replacement 2700 2.4gpm 308653045 308653052. …
– Homelite Universal Pressure Washer Pump 2800 PSI 2.5 GPM fits 308653052. …
– SIMPSON Cleaning 90029 Axial Cam Horizontal Pressure Washer Replacement Pump.
Don’t forget to share this post 
References and Further Readings :
