4 inches
Why does pool decking settle? Settling is all too common among pool decking. After a pool is constructed, soil (usually called backfill) is often poured around the pool before the concrete decking is poured. Typically, this soil does not get compacted well enough and over time, it settles and erodes away.
Thereof, How much does it cost to resurface Kool Deck?
Kool Deck, a trademarked product, averages about $4 per square foot.
Also to know is, How do you fix concrete around a pool? – Chisel out the crack to remove loose pieces of concrete.
– Clean the debris, including all dust and chips with a broom, shop vac or air compressor.
– Apply filler directly into cracks, checking periodically to see if it has settled.
– Allow the filler to cure over a 24-hour period.
Subsequently, question is, Can you resurface Kool Deck? Yes! If so, Cool is your answer. With a proper cleaning, Cool can be applied over existing deck coatings, saving you thousands of dollars in “rip & replace” costs.3 days ago
Also, How much does it cost to resurface pool deck?
Resurfacing also adds strength to your surface by covering and bonding any cracks in your deck. With resurfacing costs starting around $3 to $5 per sq. ft., placing an overlay on your pool deck could save you money and time.
Can you repaint Kool Deck?
Kool Decks are most often used near swimming pools, walkways and outdoor patio areas. … The Mortex Corporation recommends the use of Systex Deck Paint when painting over your Kool Deck.
How much does Renukrete cost?
Resurfacing usually costs anywhere from $3 to $8 per square foot, depending on the condition of the concrete, your location, and the color, pattern and texture you select.
How thick should a concrete slab be for a pool?
6 inches thick
What kind of concrete do you use for a pool deck?
stamped concrete
How wide should pool concrete be?
For concrete purposes we generally recommend 5′ x 5′ concrete slab. Tanning lounger/ Chaise loungers need a minimum of 8′ of concrete off of the swimming pool.
What kind of paint do you use on a cool deck?
acrylic paint
How thick should pool coping be?
1.25 inches
How much does it cost to resurface a pool deck?
Resurfacing also adds strength to your surface by covering and bonding any cracks in your deck. With resurfacing costs starting around $3 to $5 per sq. ft., placing an overlay on your pool deck could save you money and time.
How much space do you need around an inground pool?
A good rule of thumb is for a deck’s square footage to be at least the same as your pool’s square footage. To illustrate with a simple example, say a rectangle pool is 15 feet wide by 30 feet long. With a 450-square-foot pool, the deck should also be at least 450 square feet.
How much does concrete resurfacing cost?
The average cost to resurface 100 square feet of concrete is $400. Less expensive projects can run as little as $300 while more expensive ones are about $500. The price per square foot can range between $3 and $5. The resurfaced area could be a driveway, patio, pool deck, floor or slab foundation in the basement.
How wide should pool coping be?
Pool coping is a cap around the edge of the pool. Made from stone or concrete, the pool coping is normally about 12 inches wide.
What is the best paint to use on a concrete pool deck?
Dyco Pool Deck is a waterborne acrylic finish with superior film properties designed to provide a low sheen hard protective finish on concrete surfaces and pool decks. Pool Deck is formulated with UV inhibitors for a long lasting finish. Pool Deck is resistant to harsh pool chemicals. Slippery when wet.
Don’t forget to share this post 
References and Further Readings :