For up to 500 watts RMS, 8 gauge is sufficient. In the 500 – 1000 watt RMS range, you want to run 4 gauge. From 1000 – 1500 watts RMS you should be running 2 gauge. Over 1500 watts RMS you need 0 gauge and a few other wiring and vehicle upgrades.
2/0 AWG will handle around 190 amps, whereas 2 AWG will handle around 94 amps. This is slightly misleading as the length of the wire must also be considered and the % voltage drop acceptable. For a 3% drop where the load is 20 feet from the battery and you are drawing 100 amps then you would need 2/0.
Thereof, What size wire is 2 0?
Also to know is, Is 4 gauge or 6 gauge wire bigger? The larger the AWG number or wire guage, the smaller the physical size of the wire. The smallest AWG size is 40 and the largest is 0000 (4/0). AWG general rules of thumb – for every 6 gauge decrease, the wire diameter doubles and for every 3 gauge decrease, the cross sectional area doubles.
Subsequently, question is, How many watts can 0 gauge wire handle? Amp Kit AWG (Wire Size) Amplifier Wattage
———————– ———————–
1/0 AWG 1000 Watts RMS and up
4 AWG 500 – 1000 Watts RMS
8 AWG 250 – 500 Watts RMS
10 AWG Less Than 250 Watts RMS
Also, What size wire is bigger 1 0 or 2 0?
The more zeros the thicker the wire. The 1/0 means one 0, 2/0 means 2 zeros the more zeros the thicker the gauge. (ex: 0=1/0, 00=2/0, 000=3/0). If there isn’t a slash mark then it is on the other side of the scale.
What is bigger 1 gauge or 2 gauge wire?
The general rule of thumb is that the smaller the gauge number, the thicker the cable. The standardized method of measuring the thickness of a cable was established in 1857 in the United States.
What size is 4 gauge wire?
American Wire Gauge (#AWG) Diameter (inches) Diameter (mm)
————————– —————– ————-
3 0.229 5.83
4 0.204 5.19
5 0.182 4.62
6 0.162 4.11
How long can you run 14 gauge wire?
14 AWG 50 feet
—— ——-
10 AWG 64 feet
8 AWG 76 feet
6 AWG 94 feet
What is 0 gauge wire used for?
If you’re working on electrical applications that use or require an awful lot of power, you’re going to need some 0 gauge wire. As the lowest gauge of wire according to the American Wire Gauge (AWG) system, 0 gauge wire is thick, tough, and well-suited to carry a lot of electrical power.
What is the difference between #2 wire and 2 0?
2/0 (two naught) pronounced “two not” is a larger wire and will carry the 200 amps by your codes. #2 is good for up to 125 A depending its installation, configuration e.g. in open air, in a raceway, in a 3 wire cable, etc.
What diameter is 4 gauge wire?
AWG gauge Conductor Diameter Inches Ohms per 1000 ft.
——— ————————- —————–
2 0.2576 0.1563
3 0.2294 0.197
4 0.2043 0.2485
5 0.1819 0.3133
What is the difference between 1 AWG and 1 0 AWG?
But looking at the title of this thread, are you referring the difference between #1 AWG and 1/O AWG? There is a difference, 1/O is one wire size larger.
What’s the difference between 0 and 0 1 gauge wire?
The number in front of the “/” is how many zeros the gauge is. 1/0 is 0 AWG, 2/0 is 00 AWG, 3/0 is 000 AWG and so on with more zeros being thicker wire. This being cladded aluminum wire it’s current carrying capacity is less then what copper wire could carry. … Basically it can be used as either 1 or 0 gauge.
How many amps will a 2 0 wire carry?
What does AWG wire mean?
American Wire Gauge
How many amps can 4 gauge wire?
Amperage Capacities for Standard Non-Metallic (NM) Cable
——————————————————–
8-gauge wire
6-gauge wire
4-gauge wire
3-gauge wire
How long can you run 12 gauge wire?
A 12 gauge wire is typically good for 15 amp at 100 feet.
Don’t forget to share this post 
References and Further Readings :
