20mm = 25/32 inch. 21mm = just over 13/16 inch. … 23mm = 29/32 inch. 24mm = just over 15/16 inch.
Thereof, What is the standard equivalent to 24mm?
Bolt Diameter Standard Metric
————- ——– ——
7/8″ 22mm
5/8″ 15/16″ 24mm
1″ 25mm
3/4″ 1-1/8″ 29mm
Also to know is, How do you convert SAE to Metric? SAE to Metric Calculator The formula for that conversion is 1 mm = 1⁄25.4 inches, which is approximately 0.039″.
Subsequently, question is, Is 25mm the same as 1 inch? 25mm = almost 1 inch.
Also, How wide is 25 mm in inches?
Millimeters Inches
———– ——
24 mm 0.94
25 mm 0.98
26 mm 1.02
27 mm 1.06
What is 9mm in SAE?
SAE Metric Inch
—— —— —–
9mm 0.354
3/8″ 0.375
10mm 0.394
13/32″ 0.406
What metric and SAE sizes are the same?
While there is no precise correlation between SAE fractional and metric measurements, there are many sockets that are close enough in size to be used interchangeably, in some circumstances. For example, 5/16 and 8 mm, 7/16 and 11 mm, 5/8 and 16 mm, 3/4 and 19 mm, 7/8 and 22 mm, and 15/16 and 24 mm.
Is 5mm the same as 1/4 inch?
5mm = just over 3/16 inch. 6mm = almost 1/4 inch.
How many mm is 15 16 inch?
Dimensions — Inches to Metric
—————————– ——
0.750” 3/4”
0.813” 13/16”
0.875” 7/8”
0.938” 15/16”
Whats bigger 1/4 or 5mm?
MM Approximate Size In Inches Exact Size In Inches
— ————————– ——————–
4mm 1/8 Inch 0.15748 Inches
5mm 3/16 Inch 0.19685 Inches
6mm Just short of 1/4 Inch 0.23622 Inches
What metric sizes are the same as standard?
Bolt Diameter Standard Metric
————- ——– ——
3/8″ 9/16″ 14mm
7/16″ 5/8″ 16mm
1/2″ 3/4″ 19mm
9/16″ 13/16″ 21mm
What is the same as a 24mm socket?
Not only is 15/16″ basically the same as 24mm, but 1 1/16″ is the same as 27mm.
What is SAE size?
What is SAE? … SAE, which stands for the Society of Automotive Engineers, was used as the standard primarily on U.S.-made cars and trucks through the 1970s. SAE sockets are sized in inches and fractions of inches.
What size is a 15/16 in metric?
Bolt Diameter Standard Metric
————- ——– ——
1/2″ 3/4″ 19mm
9/16″ 13/16″ 21mm
7/8″ 22mm
5/8″ 15/16″ 24mm
Is 50mm 2 inches?
Millimeters (mm) Inches (“) (decimal) Inches (“) (fraction)
—————- ——————– ———————
50 mm 1.9685 ″ 1 31/32 ″
60 mm 2.3622 ″ 2 23/64 ″
70 mm 2.7559 ″ 2 3/4 ″
80 mm 3.1496 ″ 3 5/32 ″
What is 9mm in standard?
9mm. Just short of 3/8 Inch. 0.35433 Inches.
What does SAE metric mean?
Tool measurements are either “Metric” or “Standard.” The latter refers to SAE tools. SAE tools are measured in 1/1000 of an inch. Metric tools are measured by the metric system. The “mm” listed on metric tools refers to millimeters.
Don’t forget to share this post 
References and Further Readings :