5.0 out of 5 stars Great stuff! Love this stuff! I’ve been using AquaFinesse exclusively since installing my Hot Tub (Jacuzzi J365) in 2009, and it’s been flawless. I test the water once a week using a spa strip, add a cup of AquaFinesse, a bit of granulated chlorine, and my water is perfect every time!
The Aquafinesse ingredients consist of a complex mixture of Inorganic Salts, Coagulants and some other environmentally friendly ingredients that have the unique ability to kill bacteria and remove the slimy Biofilm that attaches to hot tub surfaces (where 99% of the total bacteria in the spa live!) and to prevent it …
Thereof, How much Aquafinesse do I use?
Chlorine reading should be 1.5 – 3 ppm. 5. After each use of the hot tub add one half tsp of granules directly to the water and with jets running. If the tub is not in regular use this amount can be reduced to one tsp of granules at least once a week.
Also to know is, How do you use spa in Marvel? – Fill spa and install clean filters as per your spa manufacturer’s directions. …
– Heat water to desired temperature.
– Add 1 full bottle of Spa Marvel Water Treatment & Conditioner for ALL tubs up to 500 gallons (2,000 litres). …
– Ensure that the spa is programmed to filter a minimum of 6 hours a day.
Subsequently, question is, What is the best spa sanitizer? Bromine
Also, What is sanitizer for hot tub?
Bromine and chlorine are the most widely used sanitizers for hot tubs and swimming pools. Bromine tablets are loaded into a handy Floating Bromine Feeder for mixing with the water.
What chemicals do you really need for a hot tub?
– Products to Adjust pH. To keep your hot tub pH in check, you should have a pH increaser and a pH decreaser. …
– Non-Chlorine Shock. A shocking agent releases oxygen into the water, which serves a similar function as chlorine. …
– Sequestering Agent. …
– Sanitizer. …
– Defoamer. …
– Calcium.
Can you use a spa without chemicals?
So although you cannot run a hot tub without chemicals, you can run a hot tub without the harsh effects of chemicals with Silk Balance. Please note – you must drain your hot tub and flush out the pipes with Clean Start if you are switching your existing water to Silk Balance for the first time.
How long does it take for spa shock to work?
Recommendations vary with ranges between 20 minutes and 24 hours. When using a non-chlorine shock treatment the product does not sanitise, therefore you can generally use your hot tub 20 minutes after adding it to the water.
What is SPA marvel made of?
Spa Marvel is a unique formulation of natural enzymes, minerals and plant extracts. It contains no chlorine, bromine or other harsh chemicals. Spa Marvel is made with seaweed, lanolin and other natural compounds, as well as Vitamins C, D & E which are excellent for skin conditioning.
How much AquaFinesse do I use?
Chlorine reading should be 1.5 – 3 ppm. 5. After each use of the hot tub add one half tsp of granules directly to the water and with jets running. If the tub is not in regular use this amount can be reduced to one tsp of granules at least once a week.
What is hot tub stabilizer?
Hot tub stabilizer is a chemical cyanuric acid. When exposed to sunlight, it reduces the amount of chlorine needed to keep the water clean. … Hot tub stabilizer is used to bond with the chlorine, preventing this reaction.
Can you over shock a hot tub?
You only need a small amount of chlorine to successfully sanitize your spa, so it’s possible to overdo it if you’re not careful. Too much chlorine can damage your hot tub and irritate your skin, eyes and lungs. Thankfully, reducing the chlorine levels in your hot tub is very easy to do.
How do you use spa Marvel cleanser?
– Step #1. Remove filters. You will not harm your tub by operating it with the filters out.
– Step #2. Add one full bottle of Spa Marvel Cleanser into the existing water. Spa Marvel Cleanser performs much better in warmer water than in colder water. …
– Step #3. Repeat before every drain and refill.
What does SPA perfect do?
Spa Perfect’s SMARTZyme™ technology reduces unwanted non-living organic contaminants such as: body oils, cosmetics, suntan lotions, hair products and so much more! No more waterline rings, cloudy water or unpleasant odors. Spa Perfect also works as a continuous cartridge filter cleaner.
How long does it take for shock to work?
Always run the pump when shocking the pool and allow it to circulate for 24 hours. The water should then be a blue or cloudy blue color. Test the water 24 hours after shocking and start adjusting pH and alkalinity levels. The chlorine will still be elevated, but over a few days it should stabilize.
How do I get my hot tub to work?
– Rinse and Drain. …
– Turn off All Power. …
– Clean the Empty Hot Tub. …
– Install or Clean the Filter. …
– Fill Your Hot Tub. …
– Prime the Pump. …
– Add the Start-Up Chemicals. …
– Run the Pump.
What is stabilizer on spa test strip?
Stabilizer: Stabilizer measures the amount of cyanuric acid in your pool water. Stabilized chlorine lasts longer under direct sunlight and reduces the sun’s impact to chlorine loss. Maintain Stabilizer of at least 30 ppm.
Don’t forget to share this post 
References and Further Readings :
