There are several savvy ways to spot studs without any tool. Take a look at baseboard trim or crown molding. Baseboards should be attached to studs and if the spacing of nails is about 16 inches this might be the case. Spot the nails with your eye then knock on the wall directly above the nail location.
Thereof, How do I know where the studs are in my wall?
Check by sound A good starting place is 16 inches from a corner. For better precision, use a tape measure and mark 12 inches, 16 inches, and 24 inches from the corner. Tap the wall at each distance. You’ll hear a solid sound when you tap the part of the wall that is supported by a stud.
Also to know is, How much weight can a wall hold without a stud? How much weight can drywall hold without anchors? This can be 5 to 10 pounds, but keep in mind that the drywall is an extremely brittle material and, it is not strong enough to hold the weight for a longer period of time.
Subsequently, question is, How do I find a stud in the wall?
Also, Does a stud finder app work?
Like many old-fashioned stud finders, most stud finder apps are magnetic, meaning that they simply rely on the phone’s built-in magnetometer to locate metal objects inside walls. Because wood studs are fastened with metal nails and/or screws, these applications are able to pinpoint their locations.
How do you read the stud finder app?
Like many old-fashioned stud finders, most stud finder apps are magnetic, meaning that they simply rely on the phone’s built-in magnetometer to locate metal objects inside walls. Because wood studs are fastened with metal nails and/or screws, these applications are able to pinpoint their locations.
What if my wall has no studs?
If you cannot locate a stud, try tapping a small nail into the wall board near an existing fixture. If it meets resistance behind the wall-board then you have a stud. Wall studs should be spaced in regular intervals (usually 16″ on center in the US) so you can simply measure over to your mount area to locate them.
Do walls have to have studs?
They’re pretty much part of every structural feature in your home, from windows and doors to interior walls and exterior siding. Despite their essential role in building homes, studs are sometimes difficult to find. Locating studs will ensure the object you wish to hang will remain securely mounted on a wall.
How do you find a stud in an old wall?
How do I know if my wall is solid or stud?
If you hit something solid after you are through the surface material, move three or four inches to the side and try again. If it is still solid, you probably have some form of masonry. If it is hollow, you probably have a stud structure (wood or steel).
Why do stud finders never work?
Most magnet type stud finders don’t work effectively since they are dependent on locating the fasteners (screws) used to secure the drywall and they can be very difficult to locate.
How do I know if my wall is drywall?
Push a thumbtack or pin into the wall in an inconspicuous spot to test its hardness. Drywall is softer and won’t crack. Plaster is much harder. A plaster wall won’t want to take the pin and will probably splinter.
Are there studs in every wall?
They’re pretty much part of every structural feature in your home, from windows and doors to interior walls and exterior siding. Despite their essential role in building homes, studs are sometimes difficult to find. Locating studs will ensure the object you wish to hang will remain securely mounted on a wall.
Can you have a wall without studs?
Toggle Anchors or Molly Bolts This means that it’s the distinction between pulling the entire wall and removing a single screw. A toggle anchor or a toggle bolt is a great way to hang a TV without studs. You’ll need to use a hollow wall anchor that looks similar to a regular screw, with a butterfly toggle at the end.
What does it mean to find a stud in the wall?
Studs exist to hold up drywall on interior walls and wood sheathing on exterior walls. This means you will always find a stud, header, or footer on the top, bottom, or corners of walls. … There are studs on either side of a window. Most trim (crown molding, baseboard, and shoe molding) is nailed on the stud.
What do you do if you have no studs in your wall?
How do I check a stud center?
One side of the electrical box for an outlet or a switch typically attaches to a stud. Turn off the power to the outlet or switch if you plan to remove the cover and look for the stud. If you can locate the edge of the stud the box attaches to, measure out 3/4 of an inch to locate the center of the stud.
Don’t forget to share this post 
References and Further Readings :
