The negative cable connects to the body ground already—so there’s no additional danger if it rubs. It’s the same principle as why you should always disconnect the battery’s negative side first before performing electrical service.
Thereof, Is it OK to just disconnect the negative terminal?
“If someone is going away for a few months over the winter, they should definitely disconnect the battery. It’s the only way to prevent battery drain,” Rashidi said. … I would recommend taking the negative battery post out, and wrapping something around the end so it doesn’t touch anything while you’re not there.”Oct 25, 2016
Also to know is, Why do you remove negative battery cable first? By removing the negative battery cable you are disconnecting the battery from the chassis of your vehicle. If you begin to remove the positive side before the negative and your wrench would make contact with any part of the vehicle, then you could cause a short in the system.
Subsequently, question is, Why do I have to disconnect the negative battery terminal first? When a car is negatively earthed then it is prudent to take off the negative terminal first and connect it last. … The grounded terminal should be disconnected first to ensure that a battery dead-short does not occur, should the spanner disconnecting the other one contact a nearby grounded metal part.
Also, Do I need to disconnect both battery terminals?
No, it won’t. You can disconnect whichever terminal you want, or even both, it won’t discharge. Whichever one you choose results in an open circuit so no current can possibly flow. I am assuming you have a short you can’t find and want to disconnect the battery.
What happens if you disconnect the positive terminal first?
It can fall across either terminal and the car and nothing will happen. If you disconnect the positive terminal first and you drop a spanner, it is possible for it to fall across the positive terminal and any earth on the car, with spectacular and possible dangerous results.
How does a battery disconnect switch work?
Battery disconnect switches are designed to cut-off electrical power, help protect against electrical fires and theft when equipment is not in use. They also provide a reliable way to shut down electrical power during maintenance and protect batteries from excessive drain.
Should you remove positive or negative battery terminal first?
Always work on the negative terminal before the positive when you disconnect your battery. Grab a socket from your socket kit and hold it near, but not against, the nut on the negative terminal of your battery.
Do I disconnect the positive or negative?
When disconnecting the cables from the old battery, disconnect the negative first, then the positive. Connect the new battery in the reverse order, positive then negative.” When you are replacing your car battery, It isn’t always easy to remember the order in which to disconnect and reconnect the terminals.
What happens if you don’t disconnect the negative battery cable?
Never disconnect a battery cable when the engine is running. If the tool touches the battery positive terminal and a chassis ground simultaneously, as long as the negative battery cable is not connected, no damage will occur.
Which battery terminal do you disconnect?
When removing the old battery, remember to first disconnect the cables from the negative terminal, which is usually black and has a minus (-) sign then disconnect the cables from the positive terminal, which is usually red and has a plus (+) sign.
Can I disconnect the positive terminal first?
Just be careful and ALWAYS disconnect the POSITIVE terminal first. Keep the battery grounded (negative is ground). Try not to touch the positive wire on metal as it possibly could be holding some charge after you disconnect it.
How do you disconnect a negative battery cable?
First, unbolt the negative battery cable and disconnect it by lifting it free. It might take some wiggling and twisting to pull it off. Be sure never to let the wrench touch both the negative and positive terminals at the same time.
Which battery terminal should I disconnect?
“Positive first, then negative. When disconnecting the cables from the old battery, disconnect the negative first, then the positive. Connect the new battery in the reverse order, positive then negative.”
Can you just disconnect the negative terminal?
Disconnect the negative terminal. That way, you don’t risk a catastrophic short-circuit if you accidentally touch your spanner against the bodywork or a metal component whilst you’re removing the positive terminal. Disconnecting the neg terminal will be just as effective a method of isolating the battery.
How do you remove negative battery cables?
First, unbolt the negative battery cable and disconnect it by lifting it free. It might take some wiggling and twisting to pull it off. Be sure never to let the wrench touch both the negative and positive terminals at the same time.
How do you hook up a battery kill switch?
Don’t forget to share this post 
References and Further Readings :
