– What major problem do we want to solve?
– What are our specific requirements for this project?
– What specific services do vendors need to fulfill?
– What specific experience do vendors need to have to qualify?
– What specific certifications or licenses (if any) are required?
The best way to cut FRP panels is to have a circular saw blade with a specialized carbide tip. When cutting your panels, make sure to measure the size of your walls and demarcate where you need to cut. As with all things fiberglass, you need to get the proper safety equipment to prevent inhalation and flying shrapnel.
Thereof, What is an RFI and RFP?
A request for information (RFI) is used when the owner wants several contractors to provide potential solutions, while a request for proposal (RFP) is used in a bidding process to solicit offers for a project. Knowing when to use each document is key to knowing where the owner is in the buying experience.
Also to know is, How do you attach FRP trim? Start at an Inside Corner Begin the installation process at an inside corner. Attach the corner molding to the wall and apply silicone sealant into the molding’s groove. Slide the first panel into the groove, leaving 1/8-inch between the edge of the panel and the inside of the groove for expansion.
Subsequently, question is, What comes first RFI or RFP? An RFI is a formal request for general information from potential vendors. … RFIs are typically used to gather information to help decide whether to pursue further steps with a vendor. They are usually followed by either an RFP (request for proposal), RFT (request for tender), or RFQ (request for quotation).
Also, Can you use contact cement on FRP?
Assuming it is well past the curing stage, FRP is pretty inert. Just about any glue would work on it. Contact cement is just fine, probably one of the better choices.
How do you answer RFP questions?
– Understand What Services Are Required. You must understand and answer the concerns and the expectation of your client completely. …
– Identify the Problem and Solution. …
– Consider the Project Scope. …
– Be Realistic. …
– Offer Multiple Options. …
– Face the Competition. …
– Provide Added Value. …
– Present Your Team.
Can you put FRP on a ceiling?
Fiberglass reinforced panels, or FRP, are thin, flexible plastic panels made of strong polyester resin reinforced with fiberglass. They are used on walls and ceilings and can be installed directly over drywall, wood, concrete block, and many other solid surfaces. … The panels can even be hosed down for cleaning.
What is RFI RFP process?
While they may seem similar, a request for information (RFI), a request for quotation (RFQ) and a request for proposal (RFP) all have different definitions and serve different purposes within the procurement process. … An RFQ quantifies — RFQ responses provide the cost of meeting a specific need.
What makes a good RFP response?
A good response will typically have the following sections: (i) information about your company; (ii) what makes you better than competitors; (iii) your specific thoughts on the RFP project, and how you are uniquely qualified to succeed; (iv) answers to any of the customer’s specific questions; (v) your pricing section; …
How do you conduct an RFP?
– Establish the project’s boundaries. …
– Identify key stakeholders and advisors. …
– Talk to stakeholders and define your project needs.
– Write the RFP. ( …
– Create a draft of your scoring criteria. …
– Circulate the RFP. …
– Review responses. …
– Research novel technologies as necessary.
How do you attach FRP?
Apply FRP panel adhesive to the back of the panel using a putty knife or trowel. Coat the entire surface with adhesive using a cross-hatch pattern. Press the panel onto the wall and roll it with a laminate roller to remove air pockets and smooth the material in place.
How do you glue FRP panels?
When installing FRP panels over below grade concrete or block walls where moisture can penetrate from the back, attach furring strips with mechanical fasteners and Titebond Fast Set Polyurethane or Titebond Heavy Duty Construction Adhesive and then adhere a solid backing to the furring strips.
How do I submit an RFP?
– Request for Information, if necessary.
– Determination and finalization of requirements and author(s)
– Writing the first and final drafts of the RFP.
– Issuing the RFP to desired candidates.
– Waiting for candidates to issue their intent to respond, if interested.
– Establishing deadline for completed submissions.
Can you spray contact cement?
Option 1 for Spraying Contact Adhesive – A Conventional Spray Gun and Pressure Pot. The first option you have for spraying contact adhesive is to use a pressure pot with an appropriately set up spray gun. For contact adhesive a 2100 gun is a great option. … It also includes air and fluid hose for your spraying needs.
When would you use an RFI?
An RFI is primarily used to gather information to help make a decision on what steps to take next. RFIs are therefore seldom the final stage and are instead often used in combination with request for proposal (RFP), request for tender (RFT), and request for quotation (RFQ).
How do you cut fiberglass wall panels?
Cut the fiberglass panel using a circular saw with a carbide-tipped blade, a jigsaw with a metal-cutting blade, or a fine-tooth handsaw.
Can you screw FRP panels?
There is no adhesive needed; instead, the installation is done screwing into the studs directly. You do not even have to screw both the sides; there is an interlocking truss system which allows the installer to screw only one side of the panel.
Don’t forget to share this post 💖
References and Further Readings :
