The principle of the reflex level indicator is based on the reflection of light. In the gas or steam phase, the light is reflected by the prismatic grooves of the sight glass so that bright indication is achieved. In the liquid phase, the light is absorbed, resulting in a dark indication of the level.
A sight glass or water gauge is a type of level sensor, a transparent tube through which the operator of a tank or boiler can observe the level of liquid contained within.
Thereof, What is a sight glass used for?
Put simply, a sight glass is a transparent glass tube or window installed in a tank or boiler system that allows an observer to view what is happening inside the container, ensuring optimal quality and safety. Sight glasses can also serve a number of functions aside from basic viewing, but this is the most common use.
Also to know is, How do I check the water level in my boiler? The sight glass on a steam boiler, combined with a mark or gauge usually placed on the sight glass or on the boiler body behind the glass, will show the proper level to which the steam boiler should be re-filled when it’s low on water.
Subsequently, question is, What methods can be used to determine the water level in the boiler? A level indicator, whether it be a gage glass, indirect sensing method, or independent remote, is used on a steam boiler to provide a water level reading. A gage glass is the most common form of level indicator found on steam boilers.
Also, What causes low water level in boiler?
Some of the common causes include: Feedwater pump failure. Control valve failure. Loss of water to the deaerator or make-up water system.
What is boiler flame sight glass?
Put simply, a sight glass is a transparent glass tube or window installed in a tank or boiler system that allows an observer to view what is happening inside the container, ensuring optimal quality and safety. Sight glasses can also serve a number of functions aside from basic viewing, but this is the most common use.
What is water level indicator in boiler?
The steam boiler sight glass or water level gauge allows the building owner or maintenance person to monitor the required water level in the steam boiler. A mark on the boiler body indicates the desired normal water level and a sight glass shows the current water level.
What will be the effect of the lower water level in the boiler?
The effect of low water level in a boiler is that the heated tubes or the furnace tube(s) become uncovered and are no longer cooled by the boiler water. The metal temperature rapidly increases, its strength is reduced and collapse or rupture follows.
How do you drain water from a sight glass?
How is sight glass measured?
Measure the OD (outside diameter) and ID (inside diameter) of the old sight-glass. Even if the glass is broken, you can usually get a good measurement. There are only two nominal diameters that we carry, 7/8”OD-5/8”ID, and 3/4”OD-1/2”ID.
How do I know if my boiler needs water?
No Heat or Hot Water A sure – and most obvious – sign that a boiler needs immediate attention is a lack of heat and hot water.
What is the function of sight glass Mcq?
A sight glass (also called a gauge glass) is used in the liquid level measurement. It is used for continuous indication of liquid level within a tank or vessel.
How does a sight glass work?
Put simply, a sight glass is a transparent glass tube or window installed in a tank or boiler system that allows an observer to view what is happening inside the container, ensuring optimal quality and safety. Sight glasses can also serve a number of functions aside from basic viewing, but this is the most common use.
What are the indications comes in sight glass?
The principle of the reflex level indicator is based on the reflection of light. In the gas or steam phase, the light is reflected by the prismatic grooves of the sight glass so that bright indication is achieved. In the liquid phase, the light is absorbed, resulting in a dark indication of the level.
What is being done during the event of water shortage in boiler?
In the event of low water, the low water trips will trip the burner (or fuel flow for solid fuel boilers) and shut down the forced draft fan. This shuts down the heat input. A LOW-WATER CUTOFF IS A MAINTENANCE MUST!!! The trips should be installed at a water level that will prevent damage.
How many level indicators are there in the water level indicator of a boiler?
Two
What is sight glass function?
Often referred to as viewing glasses, they offer you a way to see the levels of liquids or gases that are traveling through a critical point of your design, monitor pressure changes, and virtually anything else that sight glass windows could allow you to do. …
Don’t forget to share this post 💖
References and Further Readings :
