Actually, you can bypass the flame sensor. the flame sensor is just a way of exposing the voltage on the flame sensor wire to the furnace burner flames. So you can connect the flame sensor wire to a screwdriver and put the screwdriver into the flames.
Thereof, What happens when flame sensor goes bad?
If your flame sensor is dirty or faulty, it will automatically shut down the heating unit if it doesn’t detect a flame. Most furnaces will go into a safety ignition lockout when a shutdown happens three times.
Also to know is, How long do flame sensors last? two to three years
Subsequently, question is, How do you test a flame sensor?
Also, Can you clean a flame sensor?
CLEAN THE SENSOR Next, get a very light grain sandpaper, a wire brush, or steel wool. Use this to rub the metal rod gently, and only the metal rod, to clean the dirty flame sensor. You’re not sanding down a rusty car, here; you’re just trying to get rid of grit and buildup on the sensor.
How do I know if my furnace flame sensor is bad?
Signs Your Flame Sensor May be Failing Here are three tell-tale signs that your sensor may be going bad: Your gas burners light but go out almost immediately. There is visible soot, dust, or rust that covers the tip of the flame sensor itself. The porcelain area of the sensor unit is cracked, chipped, or broken.
Can you bypass a flame sensor on a furnace?
Actually, you can bypass the flame sensor. the flame sensor is just a way of exposing the voltage on the flame sensor wire to the furnace burner flames. So you can connect the flame sensor wire to a screwdriver and put the screwdriver into the flames.
How do you test a flame sensor on a furnace?
Do all furnaces have a flame sensor?
Not all furnaces have a flame sensor, but if your furnace has one, it will be mounted close to the burner with the metal rod positioned in the flame. Flame sensors vary in size (2 to 4 inches) and shape (see examples below).
How often should a flame sensor be cleaned?
Generally speaking, the flame sensor should be replaced every two to three years as preventative maintenance.
How do you clean a flame sensor?
Once you have removed the sensor, gently rub the metal rod (and nothing else) with a very light grit sandpaper. Remember, you’re not sanding down an auto body here, just ridding the sensor of any buildup. Then, use a clean paper towel to wipe clean any dust left behind by the sanding.
Should there be a flame in the furnace?
If it’s in tip-top shape, the flame visible through the opening in your furnace should be blue/blueish green depending on whether your furnace is running on propane or natural gas. A blue steady blue flame in the burner compartment is a sign your furnace is producing complete combustion, which is ideal.
What causes a flame sensor to go bad?
As with any piece of equipment a simple reason could be that dirty flame sensor just goes bad. However a more common reason is that it is just dirty. It is a sensitive sensor so any type of dust or carbon buildup could cause it to malfunction.
How long should a flame sensor last?
two to three years
How long does a furnace flame sensor last?
two to three years
What should the flame on a furnace look like?
The burner flames from your natural gas furnace should look blue or almost completely blue. A healthy natural gas furnace flame is characterized by a roaring blue flame with a light blue triangle in its center. There may be a tiny tip of yellow.
How do I adjust the flame on my furnace?
All you will need to do is to twist the adjustment screw of the flame till the flame goes from one and half inches to two inches, which is about 4 to 5 centimeters high. Look for the adjustment screw on the pilot assembly close to the gas valve if the control valve has this adjustment feature.
Don’t forget to share this post 
References and Further Readings :