If the leak is located within your area of responsibility then you need to call a plumber. Use our waterwise specialist search to find a licensed plumber near you. If the meter is leaking at any other point on the meter please call 13 13 75 or report your fault online so that we can investigate.
– Rain. The most common cause of water to appear inside of the meter box is rain. …
– Over Irrigating. Another cause for standing water inside a meter box is over irrigation. …
– Leaks.
Thereof, Can hear water running but can’t find leak?
If you have the valve at the street (curb stop) ON and the main valve inside OFF and you still hear the sound, try shutting off the curb stop. If that stops the sound, then the leak is underground between the curb stop and your main valve. If you can’t hear the sound with the inside main valve off, the leak is inside.
Also to know is, How can you tell where a water leak is coming from? – Check your water meter. One of the best ways to tell if you have a leak in some part of your plumbing is to check the water meter. …
– Look at your usage. …
– Monitor your bill. …
– Grab some food coloring. …
– Check exterior usage. …
– Use common sense.
Subsequently, question is, How much does it cost to fix a water meter leak? Underground Water Leak Repair Cost Repairing underground water list will cost $150 to $3,000. Simple, easy to access repairs cost $150 to $700. Anything difficult to get to or that requires replacing large pipe sections might hit up to $3,000.
Also, Can hear water running in walls?
The Sound of Water Running Inside Walls In some cases, homeowners don’t hear the bursting of a water pipe, but they can hear the after-effects. If you notice the sound of cascading or falling water coming from inside a wall in your home, consider seeking water leak repair assistance.
How do you know if your water meter is leaking?
Locate your water meter and check the leak indicator to see if it is moving. Depending on the brand of your meter, the leak indicator could be a small triangular shaped dial or a small silver wheel that rotates when water is flowing through the meter. If the dial is moving, chances are, you have a leak.
How do I find a leak in my water pipeline?
– Check your water meter. One of the best ways to tell if you have a leak in some part of your plumbing is to check the water meter. …
– Look at your usage. …
– Monitor your bill. …
– Grab some food coloring. …
– Check exterior usage. …
– Use common sense.
What does it mean when you hear water running?
Tinnitus is the medical term for “hearing” noises in your ears. It occurs when there is no outside source of the sounds. The person may even think they’re hearing air escaping, water running, the inside of a seashell, or musical notes. …
How long does it take to fix a water main leak?
six to eight hours
Who is responsible for leak at water meter?
Most often, leaks between the meter and the house are the responsibility of the homeowner; leaks from the meter or pipes leading from the main to the meter are the responsibility of the water utility. The water utility should be contacted before any attempt to repair the water supply pipe.
Where is leak coming from?
The vast majority of leaks occur at or near plumbing fixtures like tubs, sinks and toilets. But if you suspect a leak in the water supply system, there’s a simple way to check it— even if the pipes are hidden inside walls. First, turn off all your faucets.
Why does it sound like water running in my house?
If you hear water surging/flowing fasat through boiler then your heating system has a leak, if water heater sounds loud likely the leak is in hot water piping. … To accelerate the process, open a top floor faucet too on both hot and cold sides – to let air in so the water in the pipes can drain down faster.
Can you have a water leak without the meter spinning?
Watch the meter. Your meter will have a triangular red round disc that is commonly called a “leak indicator.” If it is spinning, you have a leak. If there is no indicator and the actual meter dial hand is moving, water is running somewhere in your system and you have a leak – go to step 3.
Are you supposed to hear water running through pipes?
In fact, it is not uncommon to hear flowing water as it travels through the plumbing system. This is especially true with older homes when it was common to leave drain pipes exposed, such as the ceiling of a basement or garage.
How much does leak detection cost?
How much does leak detection services costs? Our leak detection services start at $325 for two hours. In almost all cases, we can find the leak within two hours; however, if it takes longer to detect due to the complexity of the situation, additional costs may apply.
How do plumbers find water leaks?
Plumbers have leak detection equipment that can quickly and accurately find the source of leaks. … Ground microphones or listening discs are acoustic listening devices that a plumber uses to find leaks. Also, an acoustic amplifier can be used to amplify the sound of plumbing leaks that may be too quiet to hear.
What causes running water sound in pipes?
The sound is caused when water rushing through the pipes is suddenly stopped, or shut off and crashes against the valve. … The rushing water’s blow is softened or absorbed by air inside the air chamber, thus eliminating the noise.
Don’t forget to share this post 
References and Further Readings :