8mm laminate floor is one of the most popular flooring options. It seems to be the happy medium between thick and thin laminate flooring options and provides ideal stability and easy installation. The 8mm thickness is enough to overcome any subfloor imperfections and create a sleek flooring solution.
Laminate flooring that interlocks easily for trouble-free installation. The resilient high-density core of Easy Clic® stands up to heavy foot traffic. Easy Clic® aluminum oxide finish resists dents, fading and stains.
Thereof, How do you cut 8mm laminate flooring?
Also to know is, What does the MM mean on laminate flooring? For laminate flooring, plank thickness is measured in millimeters (mm). A millimeter is roughly 0.039 inches. … That means it’s a 12 mm thick plank with a 2 mm thick pad attached, equaling 14 mm.
Subsequently, question is, What is the best tool to cut laminate flooring? Jigsaw
Also, Is 8mm laminate good quality?
6mm – 8mm laminate thickness These include less durability, low impact resistance, more subfloor imperfections, more echo and a plastic feel underfoot. … 8mm laminate is one of the most common options and offers better durability and comfort for a very affordable price.
What is the easiest type of flooring to install?
Vinyl plank flooring
What is the easiest flooring to install?
Vinyl plank flooring
What do you use to cut laminate?
You can use several tools to cut laminates, including a table saw or handheld power saw, a utility knife, a router or a hand slitter. The best cutting approach depends on whether you’re rough cutting or finishing edges.
How do you cut already installed laminate flooring?
Plunge the saw blade into the laminate flooring. Let go of the blade guard and allow it to snap into place. Cut along the chalk line beginning at one end of the line and ending at the other end of the line.
What is the easiest flooring to install in a bathroom?
If you are looking for the easiest bathroom flooring to install, you should consider vinyl tile, water resistant laminate flooring and the rigid core engineered wood as they are of high quality and relatively easy to install.
Why is my laminate flooring not clicking?
A Few Possible Problems Some common reasons why laminate pieces won’t snap into each other include: A warped or flawed piece of laminate. A heaved or uneven subfloor. A piece of debris trapped under the flooring or underlayment, or in the flooring’s grooves.
Is laminate flooring easy to install?
Installing laminate flooring is quite easy, and after you’ve done it once you will wonder why anyone ever pays professional installers to do this. Unlike ceramic tile, laminate flooring is a dry installation—no grout, no mortar, no adhesives that set up while you’re working.
What is the best thing to put under laminate flooring?
The normal choice is a thin foam pad material made of polyethylene or polypropylene, which rolls out in sheets. Plywood subfloors: A breathable foam-type underlayment is generally used when installing laminate flooring over plywood or OSB subfloors.
How do you fix click lock flooring?
Click lock flooring requires gap of ¼ in around the edge of the room. If the gap is not provided then expanding and contracting can cause damage to the floor boards. As there are no nails or glue involved, the best way to fix a plank that is damaged is to unclick it, remove it and place the new board in its place.
Do you need underlayment for laminate flooring?
Underlayment for laminate flooring is a must. Since laminate is a floating floor, it must be evenly distributed across your subfloor. Underlayment is what allows the floor to float, gives it stability, support, noise reduction, and supports the locking systems in between planks to assure the sturdiest flooring project.
How can I get my laminate floors to snap together?
use scrap wood to tap adjoining rows together It snaps together by lining up the planks at an angle and then flattening out the row being installed (Image 2). To save the edges of the flooring boards, use a piece of scrap wood to tap adjoining rows together.
How do you replace vinyl planks in the middle of the floor?
Cut into the plank you wish to replace so you can pop it out. Then, cut the click mechanisms off the replacement plank and neighboring planks and glue them down. To replace a click plank without disassembling the entire floor, cut into the damaged plank so that you can get your hand or a tool into it to pop it out.
Don’t forget to share this post 
References and Further Readings :