If you connect the speaker with the wires reversed it will just work the other way around. If it receives an impulse to move forwards it will move backwards instead.
typically, the positive wire is red and the ground, or negative, is black. However, most speaker wires don’t do colors. … It really doesn’t matter, as long as the same wire is connected to the same colored terminal at each end.
Thereof, What happens if speaker wires are backwards?
No, the speaker won’t suffer any damage. In a stereo configuration, reversing polarity of one speaker and not doing it to the other channel will give you a very thin sound; you’ll notice an obvious lack of bass due to the acoustic cancellation of low frequencies. You may detect anomalies in the midrange as well.
Also to know is, Does it matter which speaker wire is positive? typically, the positive wire is red and the ground, or negative, is black. However, most speaker wires don’t do colors. … It really doesn’t matter, as long as the same wire is connected to the same colored terminal at each end.
Subsequently, question is, Can you use regular speaker wire outside? Firstly – it is imperative that any speaker wire you run to outdoor units be CL2 or CL3 certified. … Therefore, when running outdoor speaker wire underground, it is strongly recommended (and in fact perhaps legally required in some cases) that you run it through electrical grade PVC conduit.
Also, Which is positive and which is negative with speaker wire white strip?
Usually* the wire with the white stripe or the dashed lines carries the “positive” (+) end, while the other, unmarked wire carries the “negative” (-) end. … However, most speaker wires don’t do colors.
Why is my speaker wire melting?
if you have too small gauge wire it will get hot and cause what you saw. also if the sub VC shorted out, it will have drawn alot more current and if your speaker wire was not a large enough gauge then it will melt too.
Can speaker wire be used outdoors?
14-gauge Brown Stranded Outdoor Speaker Wire is designed to withstand outdoor use and is approved for direct burial. It is constructed of two fully annealed stranded copper conductors with a premium grade PVC jacket material. It is UL listed for safety and CSA certified.
How do you know positive and negative on speaker wire?
typically, the positive wire is red and the ground, or negative, is black. However, most speaker wires don’t do colors. Good news is, with speakers it doesn’t really matter which one you choose as your positive and which as your negative, just so long as you are consistent.
Can regular speaker wire be used outside?
Firstly – it is imperative that any speaker wire you run to outdoor units be CL2 or CL3 certified. … Therefore, when running outdoor speaker wire underground, it is strongly recommended (and in fact perhaps legally required in some cases) that you run it through electrical grade PVC conduit.
What makes speaker wires melt?
if you have too small gauge wire it will get hot and cause what you saw. also if the sub VC shorted out, it will have drawn alot more current and if your speaker wire was not a large enough gauge then it will melt too.
How can you tell which wire is positive and negative when black?
Place the prong of the multimeter’s red wire on the bare metal on the end of one of the black wires. Don’t get confused about using the red wire from the multimeter to test a hot black wire. The positive wire on a multimeter is red, and the black wire is negative.
What happens if you cross positive and negative speaker wires?
No, the speaker won’t suffer any damage. In a stereo configuration, reversing polarity of one speaker and not doing it to the other channel will give you a very thin sound; you’ll notice an obvious lack of bass due to the acoustic cancellation of low frequencies.
Why does my speaker wire have 4 wires?
The reason you have four different colors is that some in-wall wire comes in left and right channels and the red and black are one channel and the green and white is the other channel. It doesn’t matter how they are wired but must be the same at the receiver end, usually left ch.
How far can you run outdoor speaker wire?
The rule is the total resistance of the wire should be less than 5 percent of the rated impedance of the speaker. Your Insignias are 8-ohm speakers, which means 16 gauge is good for up to a 48-foot run (per speaker). Speaker wire of 14 gauge is good for an 80-foot run, and 12 gauge is good for 120 feet.
What happens if you connect positive to negative on speakers?
When the positive amplifier terminal is connected to the positive speaker terminal and the negative amplifier terminal is connected to the negative speaker terminal, the speaker will be in correct polarity. When these connections are swapped, the speaker will be in reverse polarity.
Does black wire go to positive or negative?
Positive – The wire for the positive current is red. Negative – The wire for the negative current is black. Ground – The ground wire (if present) will be white or grey.
Which is positive and negative on speaker wire?
typically, the positive wire is red and the ground, or negative, is black. However, most speaker wires don’t do colors. … It really doesn’t matter, as long as the same wire is connected to the same colored terminal at each end.
Don’t forget to share this post 
References and Further Readings :
