18-gauge brad nailers shoot a thin nail between 3/8” to 2” depending on the model. They leave a smaller hole thanks to their small head and so are less likely to split thinner wood. They’re the ideal nailer for attaching casing to window and door jambs because they’re less likely to blow out the connections.
The primary difference between a brad nailer vs a finish nailer is that the brad nail gun shoots 18-gauge nails whereas 16-gauge or 15-gauge nails are used in the finish nailer. The small 18-gauge brad nail helps you to attach delicate trims without splitting the trim.
Thereof, Are nails for nail guns interchangeable?
If you’re asking about 18ga brads then yes, AFASIK they’re pretty much interchangeable. I think the same is true for 16ga but I’m not positive. 15ga finish nails is where you have to be careful about the brand you use. Be careful that you do get a size compatible with your nailer.
Also to know is, Can you use 18 gauge nails for baseboards? What gauge nails to use for baseboards? Based on nail size, you should be looking for anything between 15 gauge and 18 gauge. With these gauges it you can easily find nails up to 2.5” long which is an ideal length for baseboard nails.
Subsequently, question is, Can I use a brad nailer for baseboards? Can you use a brad nailer for baseboards? Brad nailers are suitable for baseboards. Most fire brads as long as 2 inches, which is enough to penetrate a 3/4-inch thick molding, 1/2-inch thick drywall, and bite into the framing lumber in the baseplate or wall studs.
Also, Can you use brads in a finish nailer?
Some carpenters use a finish nailer for this, but I like to use my smaller, lighter 18-gauge brad nailer, especially on ceilings. Brads don’t have the holding power of 15- or 16-gauge nails, of course, but I make up for that by shooting two brads into every stud or joist.
What is the best nail gun for home use?
CRAFTSMAN Cordless Brad Nailer Kit
Do you need a nail gun for brad nails?
For detailed woodwork and trim, where you need more holding strength than a micro pin can provide, a brad nailer is typically the top choice among contractors and weekend warriors alike. Brad nails are formed from a fine, 18-gauge wire, which means they are smaller in diameter and typically have less holding strength.
What is the difference between a brad nail and a finish nail?
Brad nails, or brads, are made of 18-gauge steel wire. Nail gauge sizes indicate the thickness of the nail. Thinner nails have higher gauge numbers. … Finish nails, or finishing nails, are generally made of 15- or 16-gauge steel wire, making them slightly thicker in diameter than brad nails.
When would you use a 18 gauge brad nailer?
18-gauge brad nailers shoot a thin nail between 3/8” to 2” depending on the model. They leave a smaller hole thanks to their small head and so are less likely to split thinner wood. They’re the ideal nailer for attaching casing to window and door jambs because they’re less likely to blow out the connections.
How do you nail without a nail gun?
Hold the finishing tool in one hand, and line it up with your nail. With your other hand, hammer the end of the finishing tool to drive your nail into the trim- nick free. Using spackling compound or wood putty, smooth over the nails completely. Caulk along the top and bottom of the molding.
What kind of nail gun do you use for baseboards?
A finish nailer is a versatile tool, and drives either 15- or 16-gauge nails. They are used for smaller projects than framing nails, such as crown molding, baseboards, cabinets, chair rails, decorative trim, millwork, and hardwood flooring.
What are 18 gauge nails used for?
18-gauge brad nailers shoot a thin nail between 3/8” to 2” depending on the model. They leave a smaller hole thanks to their small head and so are less likely to split thinner wood. They’re the ideal nailer for attaching casing to window and door jambs because they’re less likely to blow out the connections.
Can I use brad nails in a finish nailer?
Don’t do it. The brad nails are 18-gauge nails which have a diameter of 0.0475 inches (approximately 1.2mm). Your finish nailer is designed to use either 16-gauge (Ø0. 0625 inches) or 15-gauge (Ø0. 0720inches).
Will 34 degree nails work in 30 degree gun?
In our experience a 30 degree framing nailer will fire 34 degree framing nails successfully. While 30 degree framing nails are manufactured we only stock 34 degree. 30 degree nails nails are popular for Paslode brand tools.
Can a finish nailer shoot brads?
18-gauge brad nailer It’s perfect for standard trim, furniture making and odd jobs around the shop. Models that shoot brads up to 1-1/4- in. are common, but I strongly recommend spending a few bucks more for a gun that can handle brads up to 2 in.
Can you use 30 degree nails in a 21 degree nailer?
There are currently four different angles of straight framing nail clips: 21 degrees, 28 degrees, 30 degrees and 34 degrees. Nail clips can vary in length and gauge and even material type, but the important thing to remember is that if you have a 21-degree nailer, you can only use 21-degree nail clips.
What type of nail gun do I need for baseboards?
Nail guns made for unusual and specialty projects. Any job that requires a 15-gauge or 16-gauge nail, trim work, baseboards, crown moulding, window casings and door casings.
Don’t forget to share this post 
References and Further Readings :