A thermostat jumper wire is a short piece of wire connecting two terminals on the thermostat base. A jumper wire does not originate from behind the wall, but is unique to each thermostat. Sensi thermostat does not use jumper wires.
Wires going to the “RH,” “RC,” or “R” terminals (usually red) are the hot wire from the transformer on the heating or cooling equipment. The R terminal energizes the other terminals depending on what mode the thermostat is in or whether the thermostat is calling for heating or cooling.
Thereof, Does red wire go to RH or RC?
The RED wire or 24 Vac power lead is connected straight to the RC & 4 terminals. Some thermostat units have a dedicated R terminal and it jumpers to the RC, RH or 4 terminals internally. The W, Y and G terminals should be pretty straight forward on most all types of thermostat’s.
Also to know is, What is RC and RH on thermostat? RC: The RC terminal is the 24-volt cooling power supply. RH: The RH terminal is the 24-volt heating power supply. (Note: The RC and RH terminals are jumpered together in a four-wire heat/cool system and a single-stage heat pump system, but not in a five-wire heating/cooling system.)Jul 15, 2020
Subsequently, question is, What is RC and RH on nest? Rh stands for Red-Heat and Rc stands for Red-Cool. If you only have a single red wire the jumper between Rh and Rc are required for some heating and cooling hybrid systems depending on your thermostat.
Also, Do I use RH or RC on Nest thermostat?
The Nest Thermostat E only has an R connector, which is typically where an R wire would go. … These are not jumper wires, and you can insert the Rc wire into the Rc connector and the Rh wire into the Rh connector. Tip: Keep your old thermostat, any jumper wires and a picture of how the wires were originally connected.
What is RC and RH on a thermostat?
RC: The RC terminal is the 24-volt cooling power supply. RH: The RH terminal is the 24-volt heating power supply. (Note: The RC and RH terminals are jumpered together in a four-wire heat/cool system and a single-stage heat pump system, but not in a five-wire heating/cooling system.)Jul 15, 2020
Does red wire go to RC or RH?
The RED wire or 24 Vac power lead is connected straight to the RC & 4 terminals. Some thermostat units have a dedicated R terminal and it jumpers to the RC, RH or 4 terminals internally. The W, Y and G terminals should be pretty straight forward on most all types of thermostat’s.
What is the difference between RC and RH on a thermostat?
Rh stands for Red-Heat and Rc stands for Red-Cool. If you only have a single red wire the jumper between Rh and Rc are required for some heating and cooling hybrid systems depending on your thermostat.
Does thermostat need jumper wire?
If your system has both heating and cooling functions, you’ll need to connect both the Rc and Rh terminals with a red wire. Because many thermostats come with a pre-installed thermostat jumper wire that connects these terminals, you only need one red wire, which could be the thermostat Rc wire or the Rh wire.
Why is there a jumper between RH and RC?
Effectively there isn’t a second RH wire, although there is an RH terminal. However, the heating still needs to be controlled, so a wire known as a jumper is connected between the RC and the RH terminals so that power gets to the heating control part of the thermostat.
What is the difference between RH and RC on Nest thermostat?
Rh stands for Red-Heat and Rc stands for Red-Cool. If you only have a single red wire the jumper between Rh and Rc are required for some heating and cooling hybrid systems depending on your thermostat. Yellow/Y is the AC compressor.
Where does Rh wire go on thermostat?
The Rh wire connects to your heating system as opposed to your cooling system. This wire may be red without an “H” attached to it, depending on if you have a dual transformer setup. The Rh wire connects to the RH terminal on your thermostat.
What is the jumper wire for on a thermostat?
Most of your current thermostat’s wires will be connected to your thermostat and go through the wall to connect to your HVAC system. However, some thermostats will have a jumper wire that doesn’t go back through the wall to connect to your system. Instead, a short jumper wire connects two thermostat terminals together.
Where do thermostat wires go?
Here’s how to wire a thermostat using the color code and, FYI, each terminal’s purpose. Attach the red wire to the R terminal (Call for heating and/or cooling). Attach the green wire to the G terminal (Fan). Attach the white wire to the W terminal (Heat).
What is a jumper on a thermostat?
A thermostat jumper wire is a short piece of wire connecting two terminals on the thermostat base. A jumper wire does not originate from behind the wall, but is unique to each thermostat. Sensi thermostat does not use jumper wires.
What do the wires on a thermostat do?
The common wire, sometimes referred to as the c-wire, is what’s responsible for delivering constant power to your thermostat. For programmable thermostats and smart thermostats, c-wires are essential for setting a schedule or having your heat or air conditioner turn on at a desired temperature.
Do I need a jumper from R to RC?
If you notice a short jumper wire between RH and RC terminal, you will need to leave the jumper installed on the Wiser Air back plate located in the lower right hand corner ( no jumper wire required). In most cases, the heating and cooling system share a single transformer.
Don’t forget to share this post 
References and Further Readings :