Purpose: A Sole Plate is supplied when the customer requires a stable foundation to anchor the motor. Construction/Installation: The Sole Plate is a metal plate between 1.0″ and 1.5″ thick with four 3/4″ thick reinforcement pads welded under each foot of the motor.
Term. Definition. Sole plate. – The bottom, horizontal framing member of a wall that’s attached to the floor sheeting and vertical wall studs.
Thereof, What is a plate in carpentry?
A plate or wall plate is a horizontal, structural, load-bearing member in wooden building framing.
Also to know is, What structural purpose does a bottom plate serve? The bottom or sole plate, also called simply the sole plate, is the horizontal beam at the bottom of a framed wall. The bottom plate is a support beam that sets on the sub-floor, nailed down into the floor joists.
Subsequently, question is, Where are the plates located in wall framing? In platform framing there are three types of wall plates and are located at the top and bottom of a wall section, and the two hold the wall studs parallel and spaced at the correct interval. Each type continues in a piecewise fashion around the whole perimeter of the structure.
Also, What is the purpose of a bottom plate?
The bottom plate also serves an important role in providing wood fiber for perimeter nailing of structural and/or insulated sheathing. In some areas where additional shear panel nailing is required, the bottom plate will be “up-sized” to 4x material or greater, depending on the shear panel nailing schedule.
What are plates in framing?
Plates are horizontal members of the wall connected by studs. Bottom Plates are used to connect the wall to the floor. Top Plates support the floor above. Usually doubled up.
What are the different types of framing?
There are several types of home framing options available, but the two most common types are platform framing and balloon framing.
What is included in rough framing?
It consists of fitting together pieces of materials, such as wood, brick, concrete, and steel. Wood is the material most often used to frame houses. Rough framing is used for new home construction, as well as for building room additions.
What does framing a house include?
Wall framing in house construction includes the vertical and horizontal members of exterior walls and interior partitions. These members, referred to as studs, wall plates and lintels, serve as a nailing base for all covering material and support the upper floors, ceiling and roof.
What are the types of framing?
There are several types of home framing options available, but the two most common types are platform framing and balloon framing.
What is considered framing?
Framing, in construction, is the fitting together of pieces to give a structure support and shape. Framing materials are usually wood, engineered wood, or structural steel.
What does a bottom plate do?
Bottom Plates are used to connect the wall to the floor. Top Plates support the floor above. Usually doubled up. Sill Plates support windows and sit on top of cripple studs.
Do floor joists sit on the sill plate?
The rim joist will typically sit on the edge of the sill plate. It is common to notch the rim joist over the anchor bolts.
What are the two basic types of conventional framing?
Two basic methods are used for framing a house: platform and balloon-frame construction. Platform construction is much more common than balloon framing, though balloon framing was employed in many two-story houses before 1930.
How do you nail a bottom plate?
What are wall plates used for?
Wall plates, also known as switch plates, cover your home’s outlets and light switches, keeping wires out of sight and away from fingers. With a wide variety of colors and materials to choose from, wall plates can complement the decor of any room.
What is a bottom plate in construction?
A Bottom Plate is the piece of timber which sits on the floor and forms the bottom of the wall, carrying the stud loads to the floor joists.
Don’t forget to share this post 
References and Further Readings :
