The default master code is 1234. The master code is automatically assigned to user number 40. The master code is the first user code that comes programmed on the panel and it cannot be deleted, but it can and should be changed. The master code allows you to do quite a few things on the alarm system.
Your DSC Security System is made up of a DSC control panel, one or more keypads and various sensors and detectors. The control panel, which is a metal cabinet, will be mounted out of the way in a utility closet or in the basement. The metal cabinet contains the system electronics, fuses and back up battery.
Thereof, Why is my DSC alarm beeping?
The culprits may be a low battery (1), bell circuit (2), system trouble (3), system tamper (4), module supervision (5), RF jam detected (6), PC5204 low battery (7), or PC5205 AC Failure. … If the beeping keeps on beeping and beeping, however, you’ll probably have to replace the battery.
Also to know is, How do I stop my DSC alarm from beeping? – 1) Go to any keypad and make sure the system is disarmed. If not, enter your disarm code as usual.
– 2) Enter the *2 which will indicate the trouble condition on most DSC keypads.
– 3) Press the “#” key three times. This will silence your DSC alarm system keypads.
Subsequently, question is, How do I get my solution alarm to stop beeping? To silence, press 5 and hold until you hear keypad beeping twice. Will then display type of fault, refer to your manual. Press #to exit this feature. Note that silencing the codepad will not stop the beeping permanently.
Also, Who owns DSC?
Tyco International
What is DSC security system?
Your DSC Security System is made up of a DSC control panel, one or more keypads and various sensors and detectors. The control panel, which is a metal cabinet, will be mounted out of the way in a utility closet or in the basement. The metal cabinet contains the system electronics, fuses and back up battery.
How do you use a DSC alarm system?
How do you clear a DSC alarm trouble code?
DSC alarms can go off for a number of reasons. To reset the alarm or the warning lights, enter your master code twice, press the reset button, and then enter “*72” if the alarm is still ringing.
Why is my DSC alarm system beeping?
Some common beep-inducing issues include low battery indications, battery failure, phone line failure, and communication issues. Before you do anything, make sure that your system is disarmed. Then, to determine the condition that’s troubling your DSC alarm, press the * key followed by the number 2.
How do I make my alarm stop beeping during a power outage?
Most systems will begin beeping or chirping as a result of a total power outage or failure to recharge the system backup battery. For many of our most popular systems, beeping alarms and low battery trouble beeps can be silenced by pressing the [OFF] or [#] buttons from the keypad.
What is a DSC system?
DSC/TCS(Dynamic Stability Control system and Traction Control System) The Dynamic Stability Control system (DSC) automatically takes control of the vehicle when skidding is detected.
How do I reset my DSC alarm?
– Open the access door on the unit.
– Press and hold the “RESET” key for 2 seconds.
– Press the buttons “*72” if the alarm does not reset after pressing the RESET button.
– Check the sensors if it still does not turn off.
How do I turn off the trouble light on my DSC alarm?
When a trouble is present the system trouble indicator light will illuminate and the keypad will beep every 10 seconds. To silence the trouble beep simply press the # key on the keypad. Now press *2 on your security keypad. The zones will light up indicating what troubles are present on the system.
How do you clear the yellow light on a DSC alarm?
Press the ‘7’ key and you will receive a number corresponding to the affected zone. The indicated zone is reading a low battery condition and needs a replacement battery. Replace the battery in the contact and the condition will clear.
What does the trouble light mean on a security system?
Blinking or illuminated trouble lights on a security system can mean many things. Generally speaking, it is telling you that something is “wrong” with your security system. In some cases, you’ll be able to fix the problem yourself.
Do alarm keypads have batteries?
Alarm keypads are the user interface for home and building security systems. … Keypads with backlit keys and displays may contain replaceable batteries as well. If your keypad is beeping or is not functioning properly, the battery may need to be removed and replaced.
How do you make your alarm stop beeping?
– Locate the source of the beeping.
– Call your alarm monitoring company.
– Check the alarm system battery.
– Disarm the alarm system.
– If all else fails, call a technician.
Don’t forget to share this post 💖
References and Further Readings :