You can use just about any surface. I would try to use a thin piece of wood. I have even seen some people use thick cardboard. I made my chalkboard from just a cut piece of plywood and about 3 -4 coats of chalkboard paint.
Chalkboard paint can be applied like regular paint, but Radek says it should not be applied directly to plastic, bare wood, or metal without priming the surface first. … Once the surface is dry, apply a latex primer. After one hour, wall paint can be applied over the surface.
Thereof, How do you seal chalkboard paint on wood?
Also to know is, What is the best chalkboard paint to use? Krylon Chalkboard Paint
Subsequently, question is, What is the best way to apply chalkboard paint?
Also, How do I get a smooth finish with chalkboard paint?
How do you apply chalkboard paint?
Can you sand chalk paint to make it smooth?
You can also lightly sand chalk paint with a fine grit sandpaper or sanding block between coats to get that “like glass” smooth finish with chalk paint. Use an damp, extra fine grit sanding sponge to get a smooth finish with chalk paint.
Can you put chalk paint on wood?
Chalk paint can be used to paint almost anything — walls, kitchen cabinets, metal, wood, and even fabric — but the most common use is to give new life to old furniture or to make newer pieces look old. The great thing about chalk paint is that there isn’t a huge learning curve or a lot of prep work.
How soon can you seal chalk paint?
24 hours
What material is best for chalkboard paint?
You can use just about any surface. I would try to use a thin piece of wood. I have even seen some people use thick cardboard. I made my chalkboard from just a cut piece of plywood and about 3 -4 coats of chalkboard paint.
Should you sand between coats of chalk paint?
Chalk paint needs to be applied in several layers, and first-time users need not fret when the first coat goes a bit streaky or blotchy. … Lightly sanding between coats is a good rule of thumb for achieving a smooth finish on any painted surface, but the chalky nature of chalk paint makes it especially easy.
Why does my chalk paint look blotchy?
A blotchy appearance can come from either a poor painting job, waxing in sections and not blending the areas in the final phase, or sometimes – over wiping wax off and causing some areas to seem buffed and other areas not.
Can you use a roller to apply chalk paint?
Depending on the size of the object you’re painting, you can opt to use a brush, roller, or spray gun to apply chalk paint. … Roll a thin layer of paint in a long, unidirectional stroke, then pull it back and make one more stroke in the original direction. Repeat this process until the entire surface is coated.
Can you use polyurethane over chalk paint?
Yes, you can use polyurethane over chalk paint. Poly is very durable, inexpensive and watertight.
Do you have to seal chalk paint?
Leaving your chalk-painted surface bare, or with no topcoat, is the simplest treatment with the least alteration to the finish. However, adding no protection means your piece is vulnerable to the elements, wear and tear, and natural distressing.
Can I sand paint to make smooth?
For the smoothest possible topcoat, hand-sand the entire door after the primer and between coats of paint. … Sand with non-clogging 180- or 220-grit sandpaper or sanding sponges (look for “non-clogging” or “stearated” on the label). Sand just enough to make the surface feel smooth.
Is it better to use a paint brush or roller?
Roller provides thin, uniform and even coats, and is an ideal tool for painting large, smooth and well-prepared walls, ceilings, and large furniture. The roller is more economical to use than the brush since its porous surface holds much more paint and distributes an even layer of paint much faster.
Don’t forget to share this post 
References and Further Readings :
