Sprinkle the baking soda over the fiberglass surface of your shower, then spray with the white vinegar, causing a paste to form. Gently scrub the fiberglass tub, floors and walls with this solution using a non-abrasive sponge. Be sure to wear rubber gloves when working with vinegar to protect your hands.
Thereof, How can I make my fiberglass tub look new?
– Pour undiluted white vinegar into a clean, empty spray bottle.
– Spray all of your tub’s surfaces, including cracks, crevices and hardware. …
– Wet a cleaning sponge with vinegar.
– Sprinkle baking soda onto the tub’s surfaces and use the wet sponge to scrub it in gently. …
– Rinse the tub well to remove any remaining baking soda.
Also to know is, What is the best thing to clean a fiberglass tub with? Before you give up on trying to scrub away the stains, try the cleaning process Home Depot recommends for tough stains on fiberglass: Smear on a paste of baking soda and water, and cover that with a towel soaked in vinegar. Wait one hour, then rub with a cloth or sponge. Rinse. Wipe again with a clean microfiber cloth.
Subsequently, question is, What is the best thing to clean a bathtub with? Here are the best bathtub cleaners: Best bathtub cleaner overall: Mr. Clean Magic Eraser Bath Scrubber. Best bathtub cleaner for hard water and rust stains: CLR Pro Calcium, Lime, and Rust Remover. Best bathtub cleaner for mold and mildew: Clorox Plus Tilex Mold and Mildew Remover.
Also, How do I get my fiberglass tub white again?
– Dilute the hydrogen peroxide with an equal amount of water. …
– Apply the mixture to the stained portion of the fiberglass bathtub and allow the mixture to dry.
What can I use to clean a badly stained bathtub?
– Make a bathtub cleaner paste of one part hydrogen peroxide to two parts baking soda (or cream of tartar).
– Rub the paste on the stain and let stand for 30 minutes to one hour, then wipe and rinse.
– If necessary, repeat until the stain is gone.
How do I get my bathtub white again?
To remove hard-water stains from your tub, pour in 3 cups white vinegar under running hot tap water. Let the tub fill up over the stains and allow it to soak for four hours. When the water drains out, you should be able to easily scrub off the stains. See over 100 more household vinegar uses.
What causes yellow stains in bathtub?
Introduction. Stubborn stains in your bathtub are eyesores, typically caused by mineral deposits left behind from hard water. The color of the stain will depend on what’s in your water.
How do you clean a badly stained fiberglass tub?
Before you give up on trying to scrub away the stains, try the cleaning process Home Depot recommends for tough stains on fiberglass: Smear on a paste of baking soda and water, and cover that with a towel soaked in vinegar. Wait one hour, then rub with a cloth or sponge. Rinse. Wipe again with a clean microfiber cloth.
How do you get tough stains out of a fiberglass tub?
Before you give up on trying to scrub away the stains, try the cleaning process Home Depot recommends for tough stains on fiberglass: Smear on a paste of baking soda and water, and cover that with a towel soaked in vinegar. Wait one hour, then rub with a cloth or sponge. Rinse. Wipe again with a clean microfiber cloth.
How do you make an old fiberglass shower look new?
Make a paste by mixing vinegar and borax; spread it liberally on the shower walls and pan and let it work for an hour or so. When you scrub it off and rinse, the yellow deposits will go with it. Repeat the treatment if necessary, and make a habit of repeating it again every few months.
How do you clean a yellowed fiberglass tub?
Hydrogen Peroxide: fill a spray bottle with 3-percent hydrogen peroxide. Let the solution sit for 10-15 minutes and then wipe the tub down with a damp sponge. You can repeat these steps until the yellow staining disappears.
How do you clean a badly stained porcelain tub?
If you have any tough-to-remove stains on the tub, cover them with salt and squeeze the juice of half a lemon on top. Or, you can try two parts baking soda and one part hydrogen peroxide set on a stain for about 30 minutes. Use a clean cloth or sponge to scrub the salt mixture into the stain and remove it.
How do you clean a bathtub without scrubbing?
Heat one-fourth cup vinegar and pour into a spray bottle. Add one-quarter cup liquid dish detergent, and it give a little shake to distribute. That’s it! The vinegar and dish soap work together to tackle soap scum and dirty tub rings.
What causes yellow stains in shower?
Cause: If you’re seeing a yellow tint to your water and/or yellow stains on your sink, tub, fixtures and laundry, this is may be caused by natural organic material known as tannins. … Cleaning: White vinegar and a nylon sponge works great to clean stains caused by tannins.
What is the best cleaner for bathtub stains?
Best bathtub cleaner overall: Mr. Clean Magic Eraser Bath Scrubber. Best bathtub cleaner for hard water and rust stains: CLR Pro Calcium, Lime, and Rust Remover. Best bathtub cleaner for mold and mildew: Clorox Plus Tilex Mold and Mildew Remover.
What is the best cleaner for fiberglass tubs?
– Fuller Brush Bath Clean.
– Chlorox Clean-Up Cleaner.
– Bio-Kleen Fiberglass Cleaner.
– Tilex Mold & Mildew Remover.
– Mr. Clean Magic Eraser Scrubber.
– Scrubbing Bubbles.
– Mold Armor Spray.
– Charlie’s Soap Cleaner.
Don’t forget to share this post 
References and Further Readings :
