Fiberglass-Faced Gypsum Sheathing helps exterior walls resist air, water and noise infiltration. Exterior Gypsum Sheathing is a special-purpose drywall panel consisting of a moisture-resistant, noncombustible core covered by glass-mat facers on both front and back surfaces and long edges.
Mostly an interior wall type covering, drywall can be used on exterior walls if it’s protected from any long exposure to moisture, or if it’s used as a base for other kinds of siding. If it’s the outermost surface, drywall will need to be sealed to ensure that is lasts as long as possible.
Thereof, Can you waterproof drywall?
Yes, you can make drywall pretty much waterproof if you coat it on all sides and edges with water-based urethane before you install it. … The secret tip to making the drywall waterproof is to coat the paper surfaces of the drywall, including the edges, with clear water-based urethane BEFORE you finish the drywall.
Also to know is, How much does a 4×8 sheet of Sheetrock cost? The average price for drywall and sheetrock is $15 per 4′ x 8′ panel, with a typical range of $12 to $20 per panel. This translates into a cost of $0.40 to $0.65 per square foot. For walls and ceiling for a 200 square-foot room, you can expect to pay $300 to $500.
Subsequently, question is, What is waterproof drywall called? Green board drywall
Also, Is it better to hang drywall vertical or horizontal?
On commercial jobs, fire codes often require seams to fall on the entire length of the framing, so the drywall must be hung vertically. However, on residential jobs, the drywall on the walls is typically hung horizontally. For walls nine feet high or shorter, hanging the drywall horizontally has a number of benefits.
Can you put RedGard on drywall?
It’s true that RedGard can be used on drywall, but when all their product information is carefully considered, it is not the case that RedGard can be used on Drywall in a wet area.
How much would it cost to drywall a $1500 sq ft house?
How much is a sheet of Sheetrock?
Item Unit Cost Cost
——————————- —————– ———
Standard ½” drywall $10-$20 per sheet $320-$640
Moisture/Mold resistant drywall $13-$25 per sheet $416-$800
Fire-resistant drywall $13 per sheet $416
Soundproof drywall $50 per sheet $1,600
Should you stagger drywall joints on walls?
Drywall butt joints should always be staggered. This makes it easier for taping and finishing and increases the overall strength of the entire wall.
How much does it cost to drywall a ceiling?
The cost to drywall a ceiling ranges from $2.25 to $3 per square foot. This is because ceilings are more difficult to hang and finish. Part of the higher cost for ceilings includes lightweight drywall.
What kind of drywall do you use for interior walls?
This thickness is most often used to repair existing drywall that needs patching. 1/2-Inch Drywall: Most drywall measures 1/2-inch thick. It’s the most common choice for interior walls because they are easy to carry and hang.
What is Rhino board made of?
RhinoBoard is a plasterboard and consists of an aerated or foamed gypsum core encased in, and firmly bonded to, special paper liners. RhinoBoard is non combustible and it is used as a lining in fire rated drywall and ceiling systems.
What kind of drywall do you use for plaster?
Blue board drywall is also known as plaster baseboard. Blue board is used for veneer plastering, and the surface paper has special absorption qualities. It has a high water and mold resistance and there are fewer steps involved in veneer plastering. Blue board drywall is not made for mud, tape, or paint.
Can I use plaster on drywall?
Plaster veneer may also be applied to ordinary drywall, or over existing walls, but this requires “gluing” the existing wall surface by painting on a special adhesive compound, and then applying a thin layer of “base coat” plaster. … After the walls are fully cured, they are ideal for painting or papering.
How much does it cost to drywall a 1000 square foot house?
For this reason, drywall installation has a range of associated costs. The national average cost to install drywall is between $1,500 and $2,000, with most homeowners spending around $1,750 on 1,000 sq. ft. of standard ½” drywall, hung and finished in a remodel.
What kind of drywall do you use in a shower?
Look into cement board if you need waterproof drywall. This type of waterproof drywall is designed for wet areas such as showers and bathtub surrounds. Be cognizant that cement board requires a moisture barrier behind it, which makes the installation process longer than moisture-resistant drywall.
Should you stagger drywall joints?
It’s not necessary to stagger seams on ceiling drywall. However, because these joints are relatively difficult to finish—and tend to be noticeable in the finished product—it’s a good idea to stagger the drywall panels to make the joints less visible.
Don’t forget to share this post 
References and Further Readings :
