Most people have their own personal setting. The “ideal” temperature range for most spas is from 100-102°F. This makes sure you stay warm and relaxed, but don’t overheat your body. The recommended maximum temperature for hot tubs is around 104°F.
ECONOMY mode heats the spa water during filter cycles only. For example if your spa is set for 100 degrees it will heat until the water temperature reaches 100 as long as the filter cycle is running.
Thereof, What does SL on a hot tub mean?
sleep mode
Also to know is, Should I leave my hot tub on all the time? In most cases, yes; you should leave your hot tub on 24/7. Frequently turning it off and on, or frequently lowering and raising the temperature will significantly raise your electricity costs. … It takes more energy to heat the hot tub than it does to leave it running all the time.
Subsequently, question is, Should I leave my lazy spa on all the time? 1. Leave Your Lay-Z-Spa Heater Activated Between Uses. Depending on the amount you use your Lay-Z-Spa, in our experience it is better to leave the heater activated all of the time, if used regularly – say 3 or more times per week.
Also, Should my hot tub pump run all the time?
A dip in the spa can be a spontaneous event whenever the mood strikes. Since your hot tub pump circulates the warm water as well as the sanitizer, a general rule is to follow manufacturer recommendations or leave the pump on for a minimum of eight hours per day.
What is the best thing to sit a hot tub on?
A concrete surface is an excellent base for your hot tub as this material is extremely sturdy and long-lasting. If you have an existing patio made of concrete bricks, make sure it’s in good condition and is level (not angled for drainage). A customized poured concrete pad is an even better choice.
Who makes Garden Leisure Spas?
Tatum
How do I get my hot tub out of sleep mode?
Does turning down hot tub save money?
Turn Down the Temperature Setting a lower hot tub temperature will save energy and money, and will reduce evaporation, thereby preserving the chemicals in the water. … Use a floating thermometer to keep an eye on the temperature so it doesn’t get too hot.
Is Leisure Bay Spas out of business?
Leisure Bay Spa company is out of business. Replacement parts are obsolete (not made anymore). … Leisure Bay spa shells and frames routinely last 30-40 years, but the moving parts behind the access panel door seldom run more than 10 years.
How do I get my master spa out of economy mode?
Press the “Cool” button to cycle through the Master Spa’s three cycles, Standard, Economy and Sleep. The “Cool” button can be found to the immediate right of the “Program/Mode” button.
What does f4 mean on hot tub?
OH Overheat Protection (Heater is deactivated, pumps low speed is activated).
— ————————————————————————–
SN Flow Switch (heater is deactivated. Pump may also be deactivated).
F2 Panel sensors have been pressed too many times in a short period of time.
F4 Circuit Board temperature has exceeded acceptable limit.
What temperature should a lazy spa be set at?
The majority of hot tub users prefer a water temperature in the range of 100°F-102°F. 104°F is the standard maximum temperature, which some users also prefer. Always consult a physician before getting in the hot tub while pregnant.
What does the code SL mean on a hot tub?
Sleep Heating Mode
How do you fix the code on a hot tub?
Check the water level to make sure it is not too low in the spa. Then make sure you do not have an air lock in the spa pump or spa heater causing the code. You can also try removing the spa filter, or replace with a new one to see if the error code goes away while the old filter is removed.
How do you change the mode on a hot tub?
The procedure for switching from one mode to another is different depending on the type of keypad installed on your hot tub. Keypads without a “Mode” button. Press “Temp”, then “Light” to switch to the next mode. Repeat the process until you reach the mode that you’re looking for.
Do you leave lazy spa pump on all the time?
Leave Your Lay-Z-Spa Heater Activated Between Uses Depending on the amount you use your Lay-Z-Spa, in our experience it is better to leave the heater activated all of the time, if used regularly – say 3 or more times per week.
Don’t forget to share this post 
References and Further Readings :