So for a 4×4 grow tent with an area of ~106 cubic feet, a grow tent fan (inline fan) rated for ~215cfm would get the job done.
One cfm is needed per square foot (1 cfm/sq ft) of floor area. This is the average air quantity required for a room or an entire building.
Thereof, How do you calculate CFM for a room?
– Measure the room’s width and length. …
– Multiply the three measurements from step 1 to determine the cubic footage of the room. …
– Multiply the cubic volume of the room by the number of times you want the air to turn over or exchange in an hour. …
– Divide your answer from step 3 by 60 to calculate CFM.
Also to know is, What is the formula of CFM? Start with the total volume of air (in cubic feet), divide by the exchange rate (how quickly you want to replace the air), and the result is the total CFM you need for your system. Keep in mind that many applications (especially large areas) use more than one fan/blower.
Subsequently, question is, What fans do I need for my grow tent? Setting up oscillating fans will help moderate the temperature and humidity in your grow room, but fans alone are not enough. You need an air extractor fan system to keep the air in your grow room or grow tent fresh.
Also, What size fan for 3×3 grow tent?
Well-Known Member. 6″ is way over kill for 3×3. You want to clear your air every 2 minutes. So calculate your cubic feet and divide by 2, this is the actual CFM you want to be running at.
How many CFM do I need per square foot?
One cfm
How many CFM do I need for a 12×12 room?
The rule of thumb is that you need at least 1 CFM per square foot of room area.
What size fan for 5×5 grow tent?
6 inches
How is grow room ventilation calculated?
To determine the extractor fan size of your grow room or tent, the formula is to multiply grow room volume(cubic feet), carbon filter factor(+25%), insulation factor(±20%), ducting(+10% for 10 feet) and the light factor(+10% for 1000W). You’ll get the fan size in CFM.
How do I calculate CFM for a room?
– Measure the room’s width and length. …
– Multiply the three measurements from step 1 to determine the cubic footage of the room. …
– Multiply the cubic volume of the room by the number of times you want the air to turn over or exchange in an hour. …
– Divide your answer from step 3 by 60 to calculate CFM.
How many CFM do I need for 600 square feet?
Room Size: CFM (At 2 ACH)
——————————————– ————–
How many CFM do I need for a 400 sq ft room? 107 CFM
How many CFM do I need for a 500 sq ft room? 133 CFM
How many CFM do I need for a 600 sq ft room? 160 CFM
How many CFM do I need for a 700 sq ft room? 187 CFM
What size carbon filter do I need for a 4×4 tent?
What size carbon filter for a 4×4 tent? In most cases, a 4-inch carbon filter will be more than enough for a 4×4 tent. Since a 4×4 tent has a relatively small internal volume a 4-inch carbon filter should easily remove all the odors from the air before they are exhausted from the tent.
What size fan for 10×10 grow room?
To calculate multiply length x width x height of growing area e.g. A room that is 8′ x 8′ x 8′ will have a volume of 512 cubic feet. Your extraction fan should be able to adequately exchange the air in an indoor garden once every three minutes. Therefore, 512 cubic feet / 3 minutes = 171 CFM.
How many CFM does a 2×4 tent need?
200 CFM is fine. Per your tent size, you want at least 150.
How do you size a activated carbon filter?
Activated-carbon filters usually are rated by the size of the particles they are able to remove, measured in microns, and generally range from 50 microns (least effective) to 0.5 micron (most effective).
What is the particle size of activated carbon?
Normally, activated carbons (R 1) are made in particulate form as powders or fine granules less than 1.0 mm in size with an average diameter between 0.15 and 0.25 mm. Thus they present a large surface to volume ratio with a small diffusion distance.
How much fan do I need for a grow room?
GROW SPACE SIZE Average Light WATTAGE CFM OF FAN*
—————— ——————— ————-
2′ x 4′ x 5′ 250W 80-120 CFM
3′ x 3′ x 6′ 400W 108 – 162 CFM
3.5′ x 3.5′ x 6.5′ 600W 160 – 238 CFM
4′ x 4′ x 7′ 1,000W 224 – 336 CFM
Don’t forget to share this post 
References and Further Readings :