The guideline for spacing recessed lights in a bathroom: divide the ceiling height by two. For example, in a bathroom with a 9-foot ceiling, place the lights 4.5 feet apart. The layout should provide enough light, without overwhelming the space.
Insulation Contact
Thereof, Can IC rated lights be covered with insulation?
Today’s code requirements ensure recessed lighting fixtures installed in the building envelope are “Type IC” (insulation cover rated). … Unlike their predecessors, IC fixtures can be covered with insulation and are designed to reduce energy loss.
Also to know is, Do LED recessed lights need to be IC rated? Even though they run cooler than other lightbulbs, LED recessed lights do still need to be IC rated. While LED bulbs produce significantly less heat than incandescent ones, they still do produce heat.
Subsequently, question is, Do I need special recessed lights for bathroom? While damp-rated lights are recommended in some parts of your bathroom, they’re not necessary for dry spots. … In short, unless you’re wiring fixtures in close proximity to your shower, you can use dry-rated lights for most bathroom locations.
Also, Do bathrooms need special lights?
While damp-rated lights are recommended in some parts of your bathroom, they’re not necessary for dry spots. … In short, unless you’re wiring fixtures in close proximity to your shower, you can use dry-rated lights for most bathroom locations.
What rating does a bathroom light need to be?
Zone 1 is the area above the bath or shower to a height of 2.25m from the floor. In this zone a minimum rating of IP45 is required but it is generally accepted that IP65 is to be used. It’s also worth noting that most shower lights are rated at IP65 in any case.
What does IC rated light mean?
Insulation Contact
How do you protect recessed lights from insulation?
You can insulate more effectively if the cans are IC-rated. The heat that recessed lights produce can affect temperature in the attic and in the room in which they shine. You can minimize this heat by using CFL bulbs instead of incandescent ones.
What is IC 4 rating?
The IC-4 Rating means that Redilight recessed light fittings can be safely installed without minimum clearances for normally flammable building element(s) contained in combustible areas, including ceiling spaces.
How do you tell if a can light is IC rated?
Look into the inner bulb chamber of the fixture to find the Underwriters Laboratory rating sticker, which is typically on the metal housing near the opening. This sticker will define the fixture’s rating (IC or NON-IC) and the approved maximum bulb wattage.
What is the difference between IC and non IC recessed lights?
IC housings must be installed wherever insulation will be in direct contact with the housing. … IC rated remodel housings are used in existing ceilings where insulation will be present and in contact with the fixture. Non-IC rated remodel housings are used for existing ceilings where, ideally, no insulation is present.
How do you insulate around non IC can lights?
– Remove insulation from around the recessed can fixture. …
– Construct or purchase a fire-rated cover for the fixture that is made of a fire-rated material. …
– Install the cover by centering it over the fixture with a minimum clearance of 3 inches on all sides of the recessed can light.
What is standard recessed lighting size?
The common sizes for residential recessed light fixtures are 4″ through 7″ in diameter. One way to answer this question is by considering how far the ceiling is from where you want the light, and how big an area you want to light. In an 8′ ceiling, a 4″ fixture can work well to provide kitchen countertop lighting.
How do you seal IC rated recessed lights?
Can you put recessed lights in a bathroom?
Recessed lighting can add both function and style to the bath space, helping to create an area that makes it easy to relax and unwind. … And, unlike regular wall or ceiling mounted light fixtures, recessed bath lights can be installed in shower stalls or over tub areas.
Can LED recessed lights be covered with insulation?
You could hire an electrician to replace each fixture with a sealed one rated for insulation contact (IC). … Now it will be safe to heap insulation onto that spot. I do recommend that you replace your bulbs with LEDs because they’re so energy-efficient, but make sure they’re rated for use in fully enclosed fixtures.
How many can lights for a 12×12 room?
The typical rule-of-thumb is 24″ from each wall, and then 3-5 feet between cans. So in a 12′ room you’d probably want two rows of lights. Considering it is a bedroom and you don’t need it as bright as a kitchen, you can probably get away with 2 rows of 4 lights for a total of 8.
Don’t forget to share this post 
References and Further Readings :
