Bolt Diameter Standard Metric
————- ——– ——
1/8″ 5/16″ 8mm
3/16″ 3/8″ 10mm
1/4″ 7/16″ 11mm
5/16″ 1/2″ 13mm
Table of Contents
READ ALSO
Thereof, What size socket is between 9mm and 10mm?
Inches Millimeters Spanner
—— ———– ——-
0.354 9mm 9mm
0.375 3/8 AF
0.394 10mm 10mm
0.433 11mm 11mm
Also to know is, How many mm means 1 inch? 25.4 mm
Subsequently, question is, How many mm is a 3/4 socket? Standard SAE US Wrench/Spanner Size (inches) Metric Wrench/Spanner Size (mm)
——————————————– ——————————-
3/4 19.05
25/32 19.84
20
13/16 20.64
Also, What can I use if I don’t have a 10mm socket?
3/8th of an inch is the closest SAE wrench size to 10mm. Notice that the SAE (fractional inch) wrench sizes are not exactly equivalent to metric sizes. In some cases the “equivalents” are close enough to be interchangable usually. The problem will come when you have a stuck nut or bolt.
Is 5mm the same as 1/4 inch?
5mm = just over 3/16 inch. 6mm = almost 1/4 inch.
Whats bigger 1/4 or 5mm?
MM Approximate Size In Inches Exact Size In Inches
— ————————– ——————–
4mm 1/8 Inch 0.15748 Inches
5mm 3/16 Inch 0.19685 Inches
6mm Just short of 1/4 Inch 0.23622 Inches
What size is 7/8 in MM?
Dimensions — Inches to Metric
—————————– ——
0.875” 7/8”
0.938” 15/16”
1” 1”
2” 2”
How many mm is an inch exactly?
25.4 mm
What is 5 mm thickness?
Actually, 5 mm=5mm/25.4mm/inch=0.1968 inches (rounding up). These are not 5mm thick. Also, the mm does not apply to length and width. By caliper the thickness is a little over 6 mm, or very close to 1/4″ (1/4″ = 6.096mm).
What size is a 3/4 wrench?
Bolt Diameter Standard Metric
————- ——– ——
3/8″ 9/16″ 14mm
7/16″ 5/8″ 16mm
1/2″ 3/4″ 19mm
9/16″ 13/16″ 21mm
Is 7/8 the same as 21mm?
21mm = just over 13/16 inch. 22mm = almost 7/8 inch.
Is 25 mm the same as 1 inch?
Inches to MM Conversion 1 Inch (in) is equal to 25.4 mm.
What is MM size?
How many inches is 7 8cm?
Centimeters (cm) Inches (“) (decimal) Inches (“) (fraction)
—————- ——————– ———————
5 cm 1.9685 in 1 31/32 in
6 cm 2.3622 in 2 23/64 in
7 cm 2.7559 in 2 3/4 in
8 cm 3.1496 in 3 5/32 in
What is a mil thickness?
A mil is a measurement that equals one-thousandth of an inch, or 0.001 inch. One mil also equals 0.0254 mm (millimeter). Thus a mil is not the same thickness as a millimeter. The term “mil” is not an abbreviation but a unit of measure. … 75 inches thick or 750 mils.
Is a 19mm socket the same as 3 4?
19mm = 3/4 inch. … 21mm = just over 13/16 inch. 22mm = almost 7/8 inch. 23mm = 29/32 inch.
Don’t forget to share this post 💖
References and Further Readings :
