10″
Available in 6″, 8″, 10″ and 12″ diameters in standard lengths of 4′. Sonotube® Tube Base® footing forms are used in conjunction with Sonotube concrete forms for added strength, increased stability and greater bearing capacity.
Thereof, Does concrete come in a tube?
Form Tube is designed for one-time applications to reduce the cost of pouring footings, round columns and piers. Pour concrete directly into the tube for a neat and easy form. This product is a cylindrical cardboard concrete form used for posts and pillars in above- or below-grade applications.
Also to know is, What size concrete piers do I need? Pier diameter. My rule of thumb for pier diameter is “1 inch per foot of span.” Thus, a deck that spans 8 feet will stand comfortably on 8-inch-diameter piers, while a deck that spans 10 feet requires 10-inch-diameter piers.
Subsequently, question is, How far apart should concrete piers be for a deck? 8 feet
Also, How do you use quikrete 8 in concrete forming tube?
How do you form a concrete tube?
What is sonotube made of?
These extra-strong DIY concrete forms are made of multiple layers of high quality fiber, spiral wound and laminated with a heavy-duty adhesive. Sonotube Builder’s Tube concrete forms are built strong to withstand the heavy pressure of wet concrete.
How many bags of quikrete do I need for a 10×10 slab?
For a 10 x 10 slab, you would need 77 60-pound bags or 60 80-pound bags.
Can I use deck pier blocks instead of footings?
Pier blocks can be used instead of footings for a ground-level deck not requiring permits. Piers blocks can also be used if the frost level depth is less then the height of the pier block. … These footing size requirements are to ensure enough soil bearing to prevent the joist from sinking in the ground.
How many posts do I need for a 12×16 deck?
A standard deck will need four footings parallel to the house, but they will need to be temporarily braced by 6 inch-by-6 inch posts. Using doubled boards, you will then need to build beams on the top row of the posts to frame the edges of the deck.
How do you set a 6×6 deck in concrete?
What is a sonotube?
Sonotubes® are high quality heavy-duty cardboard structures into which concrete is poured to create a smooth-sided column. The tubes have to be able to withstand the pressure of concrete and have a smooth interior to ensure a flawless column wall finish.
Can Sonotubes be left in the ground?
Absolutely NOT! Sonotubes are not designed to withstand the pressure and weight of collapsing soil and should never be used in this manner. Serious injury or death could result.
What size sonotube for a 6×6 post?
The pergola will dimension 11’x 11.5′ on center of post with 6×6 posts (4 posts), tied together with sandwiched 2×12 beams. I’ve laid out footer locations and am about to dig for 8″ sonotube forms.
Is a 12×16 deck big enough?
Party Perfect (12 ft x 16 ft) A 12×16 deck gives you room enough to break your space into zones for everyone in the family. Let the teens hang with their squad while you and your BFFs huddle in our deep seats.
How do you use concrete footing blocks?
Simply placing them on the ground or on a poured concrete pad a few inches deep usually isn’t enough to comply with codes — they must be set at least 12 inches deep in undisturbed soil. However, concrete deck blocks can be used without restriction for a freestanding deck that’s not attached to your house.
How many cubic yards are in a sonotube?
0.08 cubic yards
Don’t forget to share this post 
References and Further Readings :
