Although unsanded and touch-sanded grades of plywood are often used for soffits, optimum appearance and finish performance is achieved by using panels with Medium Density Overlay (MDO), or textured (such as APA 303 Siding) or sanded A-grade faces.
– Wood. Wood is one of the oldest materials used for soffits, and like wood siding is still around today. …
– Vinyl. Vinyl soffits are another option that emerged along with vinyl siding in the 1950s. …
– Aluminum. Aluminum is another material that’s been around for decades as a covering for the exterior of houses. …
– Fiber Cement.
Thereof, How thick should soffits be?
Standard soffit material is 3/8- or 1/2-inch-thick exterior plywood in pine (or similar softwoods) or cedar.
Also to know is, Is vinyl soffit better than aluminum? Vinyl also has a higher impact resistance than aluminum which adds to its durability. When used under eaves, it helps to improve insulation. Less energy is utilized to heat and cool the house which brings down your energy costs with time. Vinyl soffit is low maintenance yet it keeps in good shape for a long time.
Subsequently, question is, Are vinyl soffits better than wood? Although there are upfront costs associated with replacing wood soffits with vinyl, it’s likely you’ll dramatically reduce future repair expenses. Also, long-term maintenance costs typically go down when you replace wood soffits with vinyl.
Also, What is the best material for soffits?
– Wood. Wood is one of the oldest materials used for soffits, and like wood siding is still around today. …
– Vinyl. Vinyl soffits are another option that emerged along with vinyl siding in the 1950s. …
– Aluminum. Aluminum is another material that’s been around for decades as a covering for the exterior of houses. …
– Fiber Cement.
Is vinyl soffit better than wood?
Vinyl soffits and composite fascia keep insects, birds and small animals outside of your home where they belong. By comparison, rotting wood soffits may provide living creatures an opportunity to invade your eaves.
What is the best material to use for soffits?
– Wood. Wood is one of the oldest materials used for soffits, and like wood siding is still around today. …
– Vinyl. Vinyl soffits are another option that emerged along with vinyl siding in the 1950s. …
– Aluminum. Aluminum is another material that’s been around for decades as a covering for the exterior of houses. …
– Fiber Cement.
How do you replace vinyl soffit on wood?
– Step 1 – Remove the Wood Soffit. Locate the nails securing the wooden soffit material to the attic, the wall or the fascia. …
– Step 2 – Measure the Entire Soffit Area. …
– Step 3 – Install the Receiving Channel. …
– Step 4 – Install the Soffit. …
– Step 5 – Install the Trim.
What is soffit board made of?
While soffits and fascia are traditionally constructed from materials like aluminum and wood, many homeowners are now choosing ones made from synthetic and composite materials like UPVC and vinyl because they offer easy maintenance and durability.
How do you replace wood soffits?
– Remove Shingle Mold. Pry the narrow shingle mold from the fascia using a flat bar. …
– Remove Rotted Fascia. Remove the rotted section of fascia. …
– Remove Old Soffit. Pull down to remove the old soffit. …
– Remove Rotted Rafter. …
– Attach Cleat. …
– Attach New Rafter. …
– Seal Replacement Soffit. …
– Attach Replacement Soffit.
Should I use vented or solid soffit?
Non-vented or continuous soffit works best when your roof has narrow eaves or if you need to ventilate a large amount of attic space. Vented soffit panels are good with a wider eave and a smaller amount of attic space because they have smaller vents between solid panels.
What size is soffit board?
16 to 24 inches wide
How do you enclose eaves?
In some home construction, the eaves are left exposed, which leaves the ends of the roof rafters visible. You can enclose the eaves by installing soffit panels. These are panels made of vinyl or metal that create a solid cover over the eaves.
Are soffits and eaves the same thing?
Most commonly, the term soffit is used to describe the underside of the eaves. … To summarise the difference between the two in a construction context, the eave is an area of the roof which overhangs the walls, whereas the soffit is the underside component of this area only.
How far can vinyl soffit span?
16 to 24 inches
What are eaves on a house?
Eaves are the underside of your roof – specifically the part of the roof that attaches to and juts out from the house. … The overhang created by your eaves will direct water away from the walls and windows during the rain which means less cleaning and greater longevity in your build.
What paint is best for eaves?
acrylics
Don’t forget to share this post 
References and Further Readings :