After a deep power washing, the wood fibers of the various components of the deck often raise as they expand with water. Once dry, these wood fibers can often remain raised and may cause splinters. For this reason, you should plan on sanding your wood deck after power washing and before staining and sealing.
Sanding the Railings On railings, use 80- to 100-grit sandpaper, and take pains to sand all surfaces and crevices. Here, a detail sander or even sanding by hand may be necessary to get to all areas, but again, do not sand to a smoothness that will prevent the stain from penetrating.
Thereof, How long should it take to sand a deck?
– The condition of the coating on your deck.
– The type of sander you’re using.
– The size of your decking.
Also to know is, What type of sander is best for decks? A random orbital sander is a specialized tool that sands wood in an elliptical pattern and it’s the most efficient sander to use when refinishing a deck. Random orbital sanders are easy to use and are effective for this task.
Subsequently, question is, Should I wash my deck after sanding? It’s important that you make sure there is no chance of rain when you begin to sand. If the wood gets wet after it’s been sanded, but not before you’ve had the chance to stain or paint it, you’ll be back to square one — you’ll need to wash and sand it all over again.
Also, How difficult is it to sand a deck?
Sanding the outer edges of the deck board may be a little difficult depending on your deck design, especially if the railings have a very low bottom baluster rail that makes access difficult. Here, a smaller detail sander may prove useful if your standard orbital sander won’t fit.
What is the best type of sander to buy?
– Orbital Sanders Are the Best Type of Sander for Fine Jobs.
– Use Your Belt Sander for Large Projects.
– A Random Orbital Sander is Among the Most Effective Electric Sanders.
– Multi-Sanders Can Stand-in for Different Types of Sanders.
– Your Oscillating Tool is an Effective Sanding Tool, Too.
How long should deck dry before sanding?
Drying Time If the weather is hot and sunny, that could be as little as 24 hours, especially if the deck is in full sun. Drying time increases with decreasing temperature and increasing humidity. At the most, you shouldn’t have to wait longer than three days, assuming it doesn’t rain.
When should you sand your deck?
The best time for sanding a deck is when you can expect several days without rain. 3. Inspect the deck surface for protruding nails or screws. These should be countersunk 2 mm or more so that sanding your deck will go smoothly and your sandpaper won’t end up shredded.
How long does it take to sand a deck?
8 hours
What is the fastest way to sand a deck?
Should I sand my deck after pressure washing?
After a deep power washing, the wood fibers of the various components of the deck often raise as they expand with water. Once dry, these wood fibers can often remain raised and may cause splinters. For this reason, you should plan on sanding your wood deck after power washing and before staining and sealing.
How long should wood dry before sanding?
two to three days
What are the different types of Sanders?
There are four main wood sander types: belt sanders, random orbital sanders, disc sanders and finishing sanders. Each sander type has its specialized purpose. However, often these purposes overlap and one type of sander can do similar wood finishing work as another.
Do I need to wash deck after sanding?
It’s important that you make sure there is no chance of rain when you begin to sand. If the wood gets wet after it’s been sanded, but not before you’ve had the chance to stain or paint it, you’ll be back to square one — you’ll need to wash and sand it all over again.
Can I use a belt sander on my deck?
Choose the right sander. Although a floor sander is great for wood flooring – indoors – it’s not an ideal choice for the rougher, more uneven surface of a deck. Instead, use a belt sander (for large expanses) or a finishing sander (for spot sanding, as well as for corners and edges).
How long should polyurethane dry before sanding?
24 to 48 hours
Is it hard to sand a deck?
Sanding the outer edges of the deck board may be a little difficult depending on your deck design, especially if the railings have a very low bottom baluster rail that makes access difficult. Here, a smaller detail sander may prove useful if your standard orbital sander won’t fit.
Don’t forget to share this post 
References and Further Readings :
