16-gauge nailers shoot nails that are a little thinner than the 15 gauge and have a smaller head. … If you’re doing a lot of trim work and don’t want to own multiple guns, the 16-gauge is probably the most versatile.
If you can afford it, buy both a 15-gauge finish nailer and an 18-gauge brad nailer. The two guns make a winning combination. The 15-gauge nails, ranging in length from about 1-1/4 in. to 2-1/2 in., are strong enough to secure door jambs and other heavy trim materials.
Thereof, Can you use 18 gauge nails for baseboards?
What gauge nails to use for baseboards? Based on nail size, you should be looking for anything between 15 gauge and 18 gauge. With these gauges it you can easily find nails up to 2.5” long which is an ideal length for baseboard nails.
Also to know is, What’s the best nailer for trim? – BEST CORDLESS. PORTER-CABLE 20V MAX Cordless Brad Nailer Kit. …
– BEST OVERALL. BOSTITCH Nail Gun, Brad Nailer, (BTFP12233) …
– RUNNER-UP. Metabo HPT Brad Nailer. …
– BEST VALUE. WEN 61721 18-Gauge Pneumatic Brad Nailer. …
– UPGRADE PICK. …
– BEST PNEUMATIC. …
– BEST ELECTRIC. …
– BEST CORDLESS.
Subsequently, question is, What size nail gun do you use for trim? The 16-Gauge Nailer is Versatile Carpenters use them for a wide variety of tasks including interior trim, baseboard, and crown.
Also, Can you use 16 gauge nails in a 18 gauge nailer?
16 gauge has a larger head and most guns can shoot up to 2 1/2″ nails. 18 gauge has a smaller head but not vey many guns will shoot the 2″ nail. The bigger the head the bigger the hole but also better hold.
Can you use a brad nailer for trim?
Heavier gauge brings greater holding strength to projects. Brad nail uses include decorative trim, picture frames, paneling, birdhouses, narrow trim around windows or doors, shoe moulding, quarter-round moulding and other thin cuts of wood.
What are 18 gauge nails used for?
18-gauge brad nailers shoot a thin nail between 3/8” to 2” depending on the model. They leave a smaller hole thanks to their small head and so are less likely to split thinner wood. They’re the ideal nailer for attaching casing to window and door jambs because they’re less likely to blow out the connections.
Can I use brad nails for baseboard?
Brad nailers are suitable for baseboards. Most fire brads as long as 2 inches, which is enough to penetrate a 3/4-inch thick molding, 1/2-inch thick drywall, and bite into the framing lumber in the baseplate or wall studs.
Can I use brad nails for quarter round?
The preferred tool for nailing shoe molding or quarter-round is an electric finish or brad nailer. … Hold the nailer close to horizontal, but angled slightly downward. Hold the trim tight against the floor and baseboard as you fire the nailer.
What kind of nail gun do you use for baseboards?
A finish nailer is a versatile tool, and drives either 15- or 16-gauge nails. They are used for smaller projects than framing nails, such as crown molding, baseboards, cabinets, chair rails, decorative trim, millwork, and hardwood flooring.
What nails should I use for baseboards?
What size nail should I use for baseboards? As we discussed earlier with nail guns – the best baseboard nails are probably going to be 6d (2”) or 8d (2.5” for baseboard). These can easily accommodate 15 gauge or 16 gauge nails, giving you a long, durable nail for thick baseboards and studs.
Can you use 16 gauge nails for quarter round?
Like 15-gauge nailers, most 16-gauge guns shoot nails up to 2-1/2 in. You’ll pay about the same for a name-brand 16-gauge nailer as you would for a 15-gauge gun. 18-gauge brad nailer.
Can you use 15ga nails in a 16ga nail gun?
It can penetrate and support thick boards and hold them in position permanently. You should only get a 18-gauge brad nailer, if you’re willing to attach trim molding and other delicate trim pieces.” An 18-gauge fastener is smaller than 16-gauge fastener.
Can you use different brand nails in nail guns?
The brand doesn’t matter as long as the nails fit the gun. All my brad guns use Porter Cable nails even though they are three different brands.
When would you use a 18 gauge brad nailer?
18-gauge brad nailers shoot a thin nail between 3/8” to 2” depending on the model. They leave a smaller hole thanks to their small head and so are less likely to split thinner wood. They’re the ideal nailer for attaching casing to window and door jambs because they’re less likely to blow out the connections.
What is a 15 gauge finish nailer used for?
15-gauge finish nailer -thick baseboard and trim. It’s also a good choice for more demanding jobs like nailing doorjambs or stair treads. These nailers have a large piston, and because of the extra bulk, often have angled magazines so you can get into tight spots.
Can I use a brad nailer for baseboards?
Can you use a brad nailer for baseboards? Brad nailers are suitable for baseboards. Most fire brads as long as 2 inches, which is enough to penetrate a 3/4-inch thick molding, 1/2-inch thick drywall, and bite into the framing lumber in the baseplate or wall studs.
Don’t forget to share this post 💖
References and Further Readings :
