If the bulb is burning brighter than usual this is a sign that the voltage at that bulb is high when you couple this with the bulb burns out quickly. This is a pre-wired tree which means that it would be near impossible to rewire.
The brighter half is the normal level of illumination. I can confirm each and every bulb is illuminated at some level. The way some strings are wired, theres three wires where one wire runs to the 2nd half of the lights to provide power. I would check where that wire goes into the male plug, it may be loose.
Thereof, What do you do if your Christmas lights are too long?
Also to know is, Can you fix cut Christmas lights? If the wires for your Christmas tree lights have a damaged portion, you may want to cut the wire to remove that portion and splice the good pieces of wire back together. Make sure you remove the entire damaged portion, or you will have to perform the process again.
Subsequently, question is, Why are half of my LED lights a different color? Typically, if the end of the LED strip is of a different brightness or color than the beginning of the strip, there is insufficient power being provided to the device.
Also, Can you cut Christmas lights and they still work?
Short Answer: No, you can’t lengthen or shorten standard series-wired incandescent and LED Christmas tree light strings that are made with 2 or 3-wire harnesses. Even if they work at first, they won’t last long.
Why are my LED lights dim?
It could be a number of things. But most commonly, LED bulbs may flicker or dim in your home when there are voltage fluctuations in your home’s wiring. When electrical loads turn on and off in your home, this creates a change in voltage levels, which may cause the LED lights to occasionally dim or flicker.
Why are half of my LED strip lights not working?
Bad Pin Connection – If your LED strip light fails to turn on at all, then check your pin connections. … If your RGB strip lights won’t change colors try flipping your strip light around and reconnecting it. Incorrect Power Source – Make sure to double check which power source your lights require.
Are colored LED lights bad for you?
A 2012 Spanish study found that LED radiation can cause irreversible damage to the retina. A 2019 report from the French Agency for Food, Environmental and Occupational Health and Safety (ANSES) warned of the “phototoxic effects” of blue light exposure, including an increased risk for age-related macular degeneration.
Why are some of my Christmas lights dim?
Its Audible Voltage Detector easily scans and beeps for circuit interruptions at a bulb, broken wire, or poor contact where the voltage is blocked. … Using 2.5-volt bulbs on a 3.5 volt string will most likely result in a very dim string of lights.
How do you fix half of Christmas lights?
How long should you leave your Christmas lights up?
You can take them down anytime after New Year’s Day, but before January 6th—that’s Three Kings Day and the last of the 12 days of Christmas. Even if your lights celebrate a different faith this holiday season, the Black-Friday-to-Three-Kings-Day window is still a great guideline.
How do you fix bad Christmas lights?
Why is my light bulb dim?
Having flickering or dimming lights is an annoyance that most people write off to a mis-connection or faulty light bulbs. Realistically, your lights may be dimming for a number of potential electrical problems; however, the main cause of dimming is when there is a sudden increase in the load on your circuit.
Can you cut string lights?
Only Cut Light Strings Designed to be Cut Outdoor light strings with male and female end plugs are meant to be connected end to end. Shortening these lights voids the safety rating and can cause the string to no longer work. Patio light strings without end plugs are available that can be cut to any desired length.
How do I fix the color on my LED lights?
Step 1, Make sure all part of the LED strips kit are connects right and powered. Step 3, Press the “FADE7” button ,it will flash one second. Step 4, Turn on the LED strips again, press Red, Green, blue button one by one, it will change to its original color.
Why do my LED lights only work when I touch them?
Even with the power supplies and/or controlling Arduino turned off, you will still have a connection back to the mains through these small capacitors. When you touch them you ground this current, giving it somewhere to go, so the LEDs turn on. … the LEDs are lighting very slightly because your resistance is very high.
What causes a section of Christmas lights to go out?
1. A light bulb has come out of its socket or is half out of its socket and it has brought down the circuit. For light strings that commonly have over 50 bulbs, they are constructed in 2 or more continuous circuits. If a bulb is missing in a circuit only the bulbs in series of it will go out.
Don’t forget to share this post 
References and Further Readings :
