Ice Clumps in the Bin One of the most common – and innocent – causes of an ice maker that won’t dispense ice is that an ice clump has formed inside. In order to drop the ice cubes from the mold, heat is released to lightly melt them. … Sometimes you may need to remove the entire bin or even defrost the ice maker.
Cause: A common cause for a clog is frozen water in the line. Fix: To repair a frozen line, slide the refrigerator and unplug it. Locate the shut-off valve, typically underneath the sink or behind the refrigerator. … Cause: There is also a possibility that the water filter for the ice maker is clogged.
Thereof, How do I troubleshoot my Whirlpool ice maker?
Also to know is, How do I stop my Whirlpool refrigerator from making ice? A clogged water filter can restrict the flow of water to the dispenser and prevent the ice maker from working properly. The water filter should be replaced about every six months to maintain proper water flow and ensure water quality. The icemaker mold thermostat monitors the temperature of the ice mold (ice tray).
Subsequently, question is, How do I remove the ice maker from my Whirlpool refrigerator?
Also, How do I reset my Whirlpool ice maker?
Unplug the refrigerator for 30 seconds; then plug it back in. Within 15 seconds of restoring power, press the feeler arm three times in succession. This should force the ice maker to run water into the reservoir and begin the cycle of ice production.
Is there a reset button on a Whirlpool ice maker?
In most cases, to access the reset button, you will need to take the ice tray out. Once that is done, you will be able to see a bright reset button. This will mostly be located on the bottom of your ice maker. When you find this button, you will need to push it down and hold it for roughly for about 10 seconds.
How long does it take to make ice in a Whirlpool refrigerator?
6 to 12 hours
How much ice does a Whirlpool refrigerator make?
On average, your ice maker should be producing between 80-90 cubes per day, which is about 3 lbs of ice. Most refrigerator ice maker bins hold between 4-11 pounds of ice.
How do you troubleshoot an ice maker?
Fix: To repair a frozen line, slide the refrigerator and unplug it. Locate the shut-off valve, typically underneath the sink or behind the refrigerator. Turn the valve to the closed or off position. Fill a turkey baster with warm water and pour the water over the water line.
How do I clean my Whirlpool refrigerator ice maker?
Soak the plastic parts in a water-vinegar solution (1:1) to remove any lime that has built up. Clean the refrigerator with a wet sponge. Make sure to open the ice door and clean around the opening. When everything is clean, start reassembling the parts in reverse order.
How do I test my Whirlpool ice maker?
Why is my Whirlpool not making ice?
If the water inlet valve is defective, or if it has insufficient pressure, it won’t allow water to flow through. As a result, the ice maker won’t make ice. The valve requires at least 20 psi to function properly. … Before replacing the ice maker assembly, check the water inlet valve, water line, and fan.
Why is my ice machine making too much ice?
If your icemaker is making too much ice or overflowing: Be sure the bucket is properly positioned directly under the icemaker. … The feeler arm is either a metal rod on the side of the icemaker or a plastic paddle that sits horizontal under the icemaker. If the arm or paddle is broken, the icemaker needs to be replaced.
How do you reset a whirlpool ice maker?
Unplug the refrigerator for 30 seconds; then plug it back in. Within 15 seconds of restoring power, press the feeler arm three times in succession. This should force the ice maker to run water into the reservoir and begin the cycle of ice production.
How do I know if my ice maker is bad?
If the ice maker makes cubes and kicks them into the bucket – the water inlet valve is bad. If there are no new cubes in the bucket – the ice maker is bad.
Why does my ice maker not fill with water?
Water may not be reaching the ice maker due to a frozen line, missing filter, or a closed supply valve. … When there is no filter, or it is clogged, the ice maker does not get water. Make sure that the filter is in place, and if it has not been changed in more than six months, replace it with a new one.
How do I stop my ice maker from making ice?
To turn it off, set the power switch to O for off. If there is an on/off slide switch, you turn it off by sliding the switch, so the paddle is under the icemaker. Models without a switch: If no switch is present, gently lift the metal feeler arm on the side of the ice maker to the up position to turn the unit off.
Don’t forget to share this post 
References and Further Readings :
