When a nail gets caught in the gun or strikes an object and diverts, it causes a jam, and the nail gun not shooting nails. … If you found that your nail gun won’t shoot nails, the most likely reason is that the instrument gets jam. Therefore, it is necessary to learn how to unjam a nail gun quickly and correctly.
Lack of Adequate Oil: The air cylinder in the nose needs plenty of oil to function properly. Too little oil, and the nails will be slow to feed, causing a jam. Pro Tip: For coil nailers, use 10-15 drops of oil before nailing. Misshapen Coil: A coil has to be round to feed properly.
Thereof, Why does my nail gun misfire?
Two common problems causing misfire in framing guns are the driver not fully retracting or the strip follower not having enough force to push the nails up.
Also to know is, Why does my nail gun Spark? When trigger is pulled and the driver, ram, hammer, whatever it’s called, strikes the head of the nail, there is a potential for spark generation. Just the nature of the beast.
Subsequently, question is, What causes a nail gun to not fire? Usually, the pneumatic nailers are working at a pressure range of 70 to 120 psi. Pressure below the required range or high air pressure may cause problems. If the necessary air pressure is not set correctly, the nail will not shoot.
Also, Why is my nail gun just shooting air?
If you try to fire a pneumatic nail gun or stapler, but only hear air leaking when engaging the trigger, it’s likely that your tool’s “O-Ring” is not sealing properly. … Simply stretch the “O-Ring” on the firing valve and apply grease. This should take care of the issue – helping your air tool run properly.
How do I fix my air nail gun?
What causes a nail gun to double fire?
Many nail guns have a recoil, or pushback once the nail is fired. When this happens, a contact firing nailer is more likely to “double fire,” sending two fasteners out of the tool before the trigger is released. The danger, of course, is that the fastener ricochets or shoots elsewhere than the intended surface.
Why does my nail gun not fire?
First, make sure the correct air pressure is being used, you have the proper nail gauge and length installed, and that you don’t have any air leaks from your hose. Also, make sure your nailer has been properly cleaned and maintained according to the company that manufactured it.
How do you fix a jammed Porter Cable nail gun?
How do you fix a nail gun that won’t fire?
How do I fix my air nailer?
How do you unjam a Ridgid nail gun?
– Disconnect the tool from the air supply.
– Remove fasteners from the tool.
– Insert a #2 Phillips screwdriver into the driving mechanism.
– Tap the screwdriver gently with a hammer. …
– Remove the bent nail, using needle-nose pliers if necessary.
– Reconnect the tool to the air supply.
How do I adjust my nail gun?
Why is my nail gun just shoots air?
If you try to fire a pneumatic nail gun or stapler, but only hear air leaking when engaging the trigger, it’s likely that your tool’s “O-Ring” is not sealing properly. When the trigger is not depressed, you may not hear air leaking, as the valve is probably sealed.
How do you prevent nail gun marks?
What do you use a brad nail gun for?
Heavier gauge brings greater holding strength to projects. Brad nail uses include decorative trim, picture frames, paneling, birdhouses, narrow trim around windows or doors, shoe moulding, quarter-round moulding and other thin cuts of wood.
What is a second fix nail gun used for?
Second fix nailers are used to complete ‘softer’ jobs; they use smaller nails to reduce any potential impressions or damage to the work area. That’s the reason that these nail guns are ideal for more delicate interior work such as door frames, general woodwork finishing and household mouldings.
Don’t forget to share this post 
References and Further Readings :
