An unbalanced load of laundry is one of the most common causes of an inadequate spin cycle. Sometimes clothing can settle on one side of the drum, throwing off the motion of the washing machine. … If you suspect a distribution problem, try rearranging your clumped-up wet laundry and running the spin cycle again.
If the belt mechanism is loose or slipped or the belt is damaged, it may not be spinning with enough force. If the belt is broken or fully off the rollers, then it won’t spin at all. A washer that won’t spin isn’t washing. If it can’t agitate clothes, then clothes don’t get clean.
Thereof, Why is my washing machine drum not spinning?
Check the washing machine’s spin cycle. If the spin cycle works, the motor is operating and the belt is not broken. If the spin cycle doesn’t work, the belt may be loose or broken. Tighten or replace the belt. 2.
Also to know is, What is the problem if the washing machine wont spin? If your washer fills with water but doesn’t agitate, the problem is likely to be a faulty lid switch, a broken belt, or a problem with the motor. (Note: Direct-drive washing machines do not have belts.)Nov 4, 2020
Subsequently, question is, How do you fix an unbalanced washing machine?
Also, How do you fix an unbalanced Samsung washer?
Why does my washer get unbalanced?
One or more of the suspension rods might be broken. The suspension rods help to dampen the movement of the washer tub. If one or more of the suspension rods are broken, the washer will vibrate or shake. … If a suspension spring breaks, the tub might become unbalanced, causing it to shake and vibrate during operation.
How do you fix a washer that won’t spin?
Why is my Samsung washer off balance?
What Was the Problem With the Washers? Samsung says the drums in these HE top-loaders can lose balance at high spin speeds with loads like bedding and water-resistant or bulky items. This loss of balance can cause vibrations so excessive that the top of the washing machine can detach, presenting a risk of injury.
Why does my washing machine get stuck on the spin cycle?
There are a few possible reasons for this: – The locking mechanism could have jammed (maybe some clothes have gotten in the way). – There could be a glitch in the washer’s computer. – The washing machine may not be draining properly, leaving the washer door locked and the drum filled with water.
How do you fix a washing machine drum that won’t spin?
How do you fix a unbalanced Samsung washer?
How do I stop my washing machine from going off balance?
If you cannot see a problem, you may need to remove the front or top panel and the agitator. Remove the offending item and clean out any debris. Replace the agitator and panel before running the machine again. Top loading, direct drive, washers will go off balance for several reasons.
Is a washing machine drum supposed to move?
It is normal for the basket in your new Top Load washer to move freely from side to side or front to back. Grinding noise from the drum during the wash and spin cycles usually suggest that the drum bearings have worn. …
How do you fix an unbalanced load?
How do you fix a spinner on a washing machine?
How do I rebalance my washing machine?
If your washer is located on a pedestal, the problem can be amplified. Top-loading washers automatically adjust to level. If something has shifted, you can relevel a top-loading washer by tipping the washer forward, then placing it back on the floor. Front-loading washers level by turning a leg to raise or lower it.
Should a washing machine drum moves back and forth?
It is normal for the basket in your new Top Load washer to move freely from side to side or front to back. … If the washer is making a loud noise the tub bearing might need to be replace. If the washer is making a loud noise the drive pulley might be worn out, cracked, loose or bent.
Don’t forget to share this post 
References and Further Readings :